糖心原创

Faculty of Engineering
 

Image of Simon Lawes

Simon Lawes

Associate Professor, Faculty of Engineering

Contact

Biography

Dr. Lawes is an Associate Professor and Course Director of the Mechanical Engineering Course at the 糖心原创. Prior to this post he worked at the University of Leicester, where he obtained a BEng in General Engineering in 2005, a PhD in the study of wear resistant thin films for automotive applications in 2009, and worked as senior experimental officer in the Mechanics of Materials research group 2008 through to 2012. His research area is Manufacturing Metrology and his thematic interests include the principles and practice of design.

Dr Simon Lawes is part of the Advanced Manufacturing Technology Research Group

Teaching Summary

Dr. Lawes's teaching is focused on the theory and practice of design.

Link to give comments on the Mechanical Engineering Course

To all my colleagues - if you have any thoughts or ideas on the delivery of the Mechanical Engineering UGR course please feel free to submit them to me here and I will follow up by email.

https://forms.office.com/Pages/ResponsePage.aspx?id=7qe9Z4D970GskTWEGCkKHpt1oMWzLEBPt0ZhuM50IR1UQU1BSlo2Q1lQUklZNjBIRkM4NUswNktENy4u

Selected Publications

  • RUTTY, G.N., BROUGH, A., BIGGS, M.J.P., ROBINSON, C., LAWES, S.D.A. and HAINSWORTH, S.V., 2013. Forensic Science International. 225(1-3), 60-66
  • NOLAN, G., LAWES, S., HAINSWORTH, S. and RUTTY, G., 2012. International Journal of Legal Medicine. 126(1), 19-25
  • LAWES, S.D.A., HAINSWORTH, S.V., BLAKE, P., RYDER, K.S. and ABBOTT, A.P., 2010. Tribology Letters. 37(2), 103-110
  • LAWES, S.D.A., HAINSWORTH, S.V. and FITZPATRICK, M.E., 2010. Wear. 268(11鈥�12), 1303-1308
  • DICKINS, A., WIDJANARKO, T., SIMS-WATERHOUSE, D., THOMPSON, A., LAWES, S., SENIN, N. and LEACH, R., 2020. Journal of the Optical Society of America A: Optics and Image Science, and Vision. 37(9), B93-B105
  • DICKINS, A., WIDJANARKO, T., SIMS-WATERHOUSE, D., THOMPSON, A., LAWES, S., SENIN, N. and LEACH, R., 2020. Journal of the Optical Society of America A: Optics and Image Science, and Vision. 37(9), B93-B105
  • LEACH, R., BOINTON, P., FENG, X., LAWES, S., PIANO, S., SENIN, N., SIMS-WATERHOUSE, D., STAVROULAKIS, P., SU, R., SYAM, W. and THOMAS, M., 2019.
  • TODHUNTER, L., LEACH, R., LAWES, S., HARRIS, P. and BLATEYRON, F., 2019. Surface Topography: Metrology and Properties. 7(1),
  • KORNER L, LAWES S, BATE D, NEWTON L, SENIN N and LEACH R K, 2019. Meas. Sci. Technol.. 30, 125002
  • THOMPSON A, SENIN N, MASKERY I, KORNER L, LAWES S and LEACH R K, 2018. Additive Manufacturing. 20, 126-133
  • DICKENS A, WIDJANARKO T, LAWES S and LEACH R K, 2018. Design of a multi-sensor in-situ inspection system for additive manufacturing In: Proc. ASPE/euspen Advancing Precision in Additive Manufacturing, Berkeley, USA.
  • TODHUNTER, L., SENIN, N., LEACH, R., LAWES, S., BLATEYRON, F. and HARRIS, P., 2018.
  • K脰RNER, L., SU, R., LAWES, S., SENIN, N. and LEACH, R., 2018.
  • TODHUNTER, L., LEACH, R., LAWES, S., BLATEYRON, F. and HARRIS, P., 2018.
  • FENG, X. B., KINNELL, P. K. and LAWES, S., 2017. Development of CO2 snow cleaning for in situ cleaning of mu CMM stylus tips: Measurement Science and Technology Measurement Science and Technology. 28(1),
  • ALBLALAIHID, K., OVERTON, J., LAWES, S. and KINNELL, P., 2017. Journal of Micromechanics and Microengineering. 27(4),
  • TODHUNTER, L. D., LEACH, R. K., LAWES, S. D. A. and BLATEYRON, F., 2017. Measurement Science and Technology. 28(6),
  • GOMEZ C, SU R, THOMPSON A, DISCIACCA J, LAWES S and LEACH R K, 2017. Optical Engineering. 56, 111714
  • TODHUNTER, L. D., LEACH, R. K., LAWES, S. D. A. and BLATEYRON, F., 2017. CIRP Journal of Manufacturing Science and Technology.
  • GOMEZ, C., SU, R., THOMPSON, A., DISCIACCA, J., LAWES, S. and LEACH, R., 2017. Optical Engineering. 56(11),
  • FENG, X., PASCAL, J. and LAWES, S., 2017. Measurement Science and Technology. 28(9),
  • ALBLALAIHID, K., OVERTON, J., LAWES, S. and KINNELL, P., 2017. A 3D-printed polymer micro-gripper with self-defined electrical tracks and thermal actuator (vol 27, 045019, 2017): Journal of Micromechanics and Microengineering Journal of Micromechanics and Microengineering. 27(8), 2
  • ALBLALAIHID K, KINNELL P, LAWES S, DESGACHES D and LEACH R K, 2016. Sensors. 16, 492
  • HIRSCH, M., DEDENBACH, J. and LAWES, S., 2016. MechE Part B: J Engineering Manufacture.
  • OVERTON, J. K., KINNELL, P. K., LAWES, S. D. A. and RATCHEV, S., 2015. Precision Engineering. 40, 230-240
  • K ALBLALAIHID, P. KINNELL and S.D.A. LAWES, 2015. Fabrication and characterisation of a novel smart suspension for micro-CMM probes Sensors and Actuators A: Physical.
  • X. FENG, S. LAWES and P. KINNELL, 2015. In: Proceedings of the 4M/ICOMM2015 Conference.
  • X. FENG, S. LAWES and P. KINNELL, 2015. The development of a snow cleaning system for micro-CMM stylus tips In: euspen's 15th International Conference & Exhibition, Leuven, Belgium.
  • ALBLALAIHID, K., LAWES, S. and KINNELL, P., 2015. Precision Engineering.
  • ZHANG, S. Y., HAINSWORTH, S. V. and LAWES, S. D. A., 2015.
  • ALBLALAIHID, K., KIRK, T., LAWES, S. and KINNELL, P., 2014.
  • HIRSCH, MATTHIAS, DEDENBACH, JOHANNES, LAWES, SIMON and CLARE, ADAM T, 2014. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
  • P. KINNELL and S. LAWES, 2014. Mechanical structures for smart-phone enabled sensing In: Proceedings of the 8th International Conference on Sensing Technology.
  • ALSHMRI, E., ATKINSON, H. V., HAINSWORTH, S. V., HAIDON, C. and LAWES, S. D. A., 2014. WEAR. 313(1-2), 106-116
  • RUTTY, G.N., BROUGH, A., BIGGS, M.J.P., ROBINSON, C., LAWES, S.D.A. and HAINSWORTH, S.V., 2013. Forensic Science International. 225(1-3), 60-66
  • NOLAN, G., LAWES, S., HAINSWORTH, S. and RUTTY, G., 2012. International Journal of Legal Medicine. 126(1), 19-25
  • L WEI, C SINKA, SDA LAWES and T HAN, 2012. Applied Mechanics and Materials. Mechatronics and Applied Mechanics, 600-603
  • KANDEMIR, SINAN, ATKINSON, HELEN V. and LAWES, SIMON D. A., 2011. AIP Conference Proceedings. 1353(1), 1063-1068
  • HV ATKINSON, F ALSHMRI, SV HAINSWORTH and SDA LAWES, 2011. Advanced Materials Research. Mechatronics and Materials Processing I(328-330), 1545-1551
  • LAWES, S.D.A., HAINSWORTH, S.V., BLAKE, P., RYDER, K.S. and ABBOTT, A.P., 2010. Tribology Letters. 37(2), 103-110
  • LAWES, S.D.A., HAINSWORTH, S.V. and FITZPATRICK, M.E., 2010. Wear. 268(11鈥�12), 1303-1308
  • SDA LAWES, 2009.
  • S D A LAWES, M E FITZPATRICK and S V HAINSWORTH, 2007. Journal of Physics D: Applied Physics. 40(18), 5427

Faculty of Engineering

The 糖心原创
University Park
Nottingham, NG7 2RD



Contacts: Please see our 'Contact us' page