糖心原创

Faculty of Engineering
 

Image of Philip Shipway

Philip Shipway

Cripps Professor of Engineering Materials, Faculty of Engineering

Contact

Biography

Philip Shipway is part of the Advanced Materials Research Group.

Expertise Summary

Philip Shipway has general interestin the structure-property-performance relationships of engineering materials, with specific expertise in the following areas:

Tribology: within the field of tribology, Philip Shipway is an expert in the areas of wear behaviour of materials, with specific interests in wear by hard particles, fretting wear, sliding wear and wear testing to simulate service conditions. As a development of this work, he has expertise in the area of waterjet technologies for material and coating removal.

Surface Engineering: Philip Shipway has general expertise in surface engineering for wear and corrosion protection. He has specific expertise in the development of surface engineering solutions based upon thermal spraying and electrodeposition.

In-service microstructure development in coatings and bulk materials: when coatings and bulk materials are exposed to high temperatures in service, their microstructures develop and as a consequence, their properties change. Philip Shipway has interests in such microstructure development, with particular interests in coatings for high temperature service and in steels for creep resistance.

Research Summary

Thermal and cold spraying: This work concerns the development of thermal and cold spray technologies for the application of coatings to resist wear, corrosion or provide other desirable attributes.… read more

Recent Publications

  • ZHU, T., BENNETT, C. J. and SHIPWAY, P. H., 2023. Wear. 523,
  • DAURE, J. L., K脫TI, D., CARRINGTON, M. J., MCCARTNEY, D. G., STEWART, D. A. and SHIPWAY, P. H., 2023. Wear. 524-525,
  • LAOLU-BALOGUN, E., OWEN, S., BOOTH, T., PATTINSON, G., SHIPWAY, P. H. and VOISEY, K. T., 2023. Tribology International. 188,
  • CARRINGTON, M. J., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2022. Materials Characterization. 184,

Current Research

Thermal and cold spraying: This work concerns the development of thermal and cold spray technologies for the application of coatings to resist wear, corrosion or provide other desirable attributes. This work has been sponsored over the years by a large number of industrial organisations. Current research focusses on cold spray of titanium, and nickel based materials and on thermal spray of hardmetal systems. This research is supported by a wide range of thermal spray diagnostic equipment, including the DPV 2000 and a high speed PIV for cold spray. In addition to a raft of experimental work, modelling of thermal spray processes by Finite Elements enables us to understand the processes; significant success in predicting the dependence of residual stresses on processing parameters has recently been achieved.

Development of wear and corrosion resistant coatings and overlays: Work continues in development of materials for applications requiring wear resistance, employing primarily thermal spraying and electroplating, with other technoligies utilised where appropriate. As illustrative examples, we are currently investigating surfacing of sugar-cane rollers for wear and corrosion resistance, rock drilling elements for impact and wear resistance, car body panels for enhanced corrosion resistance. A major theme within this work is the development of surfaces to resist fretting wear; this work is driven by the significant development of transmission systems within the Rolls-Royce plc UTC in Transmissions.

Abrasive waterjet technologies: with a knowledge of wear comes the ability to use attritive material removal for useful purposes. Abrasive waterjets have many advantages over conventional processes in a range of applications. Currently, work is examining the use of waterjets for milling of material and for coating removal.

Welding: as part of the significant work in the Materials, Mechanics and Structures Research Division concerning welding, my interests lie in the microstructure-property relationships of welds and their development in service. Current projects are examining the laser welding of thin titanium sheet and at the development of welds in P91 and P92 power station steels and the development of the weld microstructure during elevated temperature creep.

Future Research

Development of coating technologies to meet the demanding needs in power generation. This work includes work in (i) combustion-based lower-carbon energy generating technologies and nuclear-based generating technologies; (ii) power for transport, especially focussing on aerospace technologies.

Development of coating removal technologies to enhance profitable recycling of surface engineered components.

I welcome enquiries from potential PhD candidates from Home, EU and international countries who are interested in the following research areas: Thermal and cold spraying.

  • ZHU, T., BENNETT, C. J. and SHIPWAY, P. H., 2023. Wear. 523,
  • DAURE, J. L., K脫TI, D., CARRINGTON, M. J., MCCARTNEY, D. G., STEWART, D. A. and SHIPWAY, P. H., 2023. Wear. 524-525,
  • LAOLU-BALOGUN, E., OWEN, S., BOOTH, T., PATTINSON, G., SHIPWAY, P. H. and VOISEY, K. T., 2023. Tribology International. 188,
  • CARRINGTON, M. J., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2022. Materials Characterization. 184,
  • ALTINOZEN, E., HARRISON, I., VUKOVIC, A. and SEWELL, P., 2022. IEEE Transactions on Antennas and Propagation.
  • BONETTI, R., MORRIS, A., SHIPWAY, P. H. and SUN, W., 2022. International Journal of Pressure Vessels and Piping. 199,
  • ROGERS, S. R., DAURE, J., SHIPWAY, P., STEWART, D. and DYE, D., 2022. Scripta Materialia. 221,
  • SHIPWAY, P. H., 2022. . In: Fretting Wear and Fretting Fatigue: Fundamental Principles and Applications 67-85
  • CARRINGTON, M. J., DAURE, J. L., RATIA-HANBY, V. L., ZHANG, D., SHIPWAY, P. H., STEWART, D. A. and MCCARTNEY, D. G., 2021. Tribology International. 158,
  • LAOLU-BALOGUN, E., OWEN, S. P., READ, S., PATTINSON, G., SHIPWAY, P. H. and VOISEY, K. T., 2021.
  • ZHU, T. and SHIPWAY, P. H., 2021. Wear. 474-475,
  • SHIPWAY, P. H., 2021. Wear.
  • KIRK, A. M., SUN, W., BENNETT, C. J. and SHIPWAY, P. H., 2021. Wear. 482-483,
  • SHIPWAY, P. H., KIRK, A. M., BENNETT, C. J. and ZHU, T., 2021. Wear. 486-487,
  • VENTER, A. M., LUZIN, V., MARAIS, D., SACKS, N., OGUNMUYIWA, E. N. and SHIPWAY, P. H., 2020. International Journal of Refractory Metals and Hard Materials. 87,
  • SAMUEL C COE, MATTHEW D. WADGE, REDA M. FELFEL, IFTY AHMED, GAVIN S WALKER, COLIN A. SCOTCHFORD and DAVID M. GRANT, 2020. Coatings. 10(2), 190
  • BONETTI, R., MORRIS, A., SHIPWAY, P. H. and SUN, W., 2020. International Journal of Pressure Vessels and Piping. 188,
  • CARRINGTON, M. J., DAURE, J., RATIA, V. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. 164,
  • RATIA, V. L., ZHANG, D., DAURE, J. L., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2019. Wear.
  • KIRK, A. M., SHIPWAY, P. H., SUN, W. and BENNETT, C. J., 2019. Wear.
  • KIRK, A. M., SHIPWAY, P. H., SUN, W. and BENNETT, C. J., 2019. Tribology International.
  • KIRK, A. M., SHIPWAY, P. H., SUN, W. and BENNETT, C. J., 2019. Tribology International.
  • QIN W., WANG M., SUN W., SHIPWAY P. H., L X., 2019. Wear. 426-427, 770-777
  • QIN, W., WANG, M., SUN, W., SHIPWAY, P. and LI, X., 2019. Wear.
  • RATIA, V. L., ZHANG, D., CARRINGTON, M. J., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2019. Wear.
  • REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Corrosion Science.
  • REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Corrosion Science.
  • REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Corrosion Science.
  • REDDY, L., SATTARI, M., DAVIS, C. J., SHIPWAY, P. H., HALVARSSON, M. and HUSSAIN, T., 2019. Corrosion Science.
  • KARIMI, G. N., CARRINGTON, M. J., THOMAS, J., SHIPWAY, P. H., STEWART, D. A. and HUSSAIN, T., 2019. Corrosion Science.
  • ZHU, T., SHIPWAY, P. H. and SUN, W., 2019. Wear. 440-441,
  • RATIA, V. L., CARRINGTON, M. J., ZHANG, D., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2019.
  • QIN, W., JIN, X., KIRK, A., SHIPWAY, P. H. and SUN, W., 2018. Tribology International. 120, 350-357
  • MENG, X. S., SEWELL, P., VUKOVIC, A., ZHANG, Z. W., BENSON, T. M., JONES, C., EARL, S., WALTON, R. and SOUTH, G., 2018. Numerical simulation of electromagnetic coupling in explicitly meshed wiring looms and bundles: Iet Science Measurement & Technology Iet Science Measurement & Technology. 12(2), 176-181
  • BARMAN, K., SHIPWAY, P. H., VOISEY, K. T. and PATTINSON, G., 2018. Tribology International. 123, 307-315
  • REDDY, L., PRESTON, S. P., SHIPWAY, P. H., DAVIS, C. and HUSSAIN, T., 2018. Surface and Coatings Technology. 349, 198-207
  • KARIMI, G. N., SHIPWAY, P. H., STEWART, D. A. and HUSSAIN, T., 2018. Corrosion Science.
  • DAURE, J. L., CARRINGTON, M. J., SHIPWAY, P. H., MCCARTNEY, D. G. and STEWART, D. A., 2018. Surface and Coatings Technology. 350, 40-47
  • RATIA, V. L., ZHANG, D., CARRINGTON, M. J., DAURE, J. L., MCCARTNEY, D. G., SHIPWAY, P. H. and STEWART, D. A., 2018. Wear.
  • A.F. HASAN, C.J. BENNETT, P.H. SHIPWAY, S. CATER and J. MARTIN, 2017. Journal of Materials Processing Technology. 241, 129-140
  • MOHD TOBI A L, SUN W and SHIPWAY P H, 2017. Tribology International. (In Press.)
  • BARMAN K, SHIPWAY P H, VOISEY K T and PATTINSON G, 2017. Progress in Organic Coatings. 67-80
  • HUTCHINGS, I. and SHIPWAY, P., 2017.
  • PACELLA, M., AXINTE, D. A., BUTLER-SMITH, P. W., SHIPWAY, P., DAINE, M. and WORT, C., 2016. Journal of Manufacturing Science and Engineering, Transactions of the ASME. 138(2),
  • X JIN, W SUN and P H SHIPWAY, 2016. Tribology International.
  • X JIN, W SUN and P H SHIPWAY, 2016. Tribology International.
  • WARMUTH A R, SUN W and SHIPWAY P H, 2016. Royal Society Open Science.
  • O'HALLORAN S M, SHIPWAY P H, CONNAIRE A D, LEEN S B and HARTE A M, 2016. Tribology International. (In Press.)
  • MOHD TOBI A L, SUN W and SHIPWAY P H, 2016. Tribology International. (In Press.)
  • WARMUTH, A.R., SHIPWAY, P.H. and SUN, W., 2015. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 471(2178), 20140291
  • HUANG, L., KINNELL, P. and SHIPWAY, P. H., 2015. Journal of Materials Processing Technology. 223, 129-138
  • HASAN, A. F., BENNETT, C. J. and SHIPWAY, P. H., 2015. Materials and Design. 87, 1037-1046
  • JIN, X., SHIPWAY, P. H. and SUN, W., 2015. Wear. 330-331, 103-111
  • PEARSON, S. R. and SHIPWAY, P. H., 2015. Wear. 330-331, 93-102
  • Z. KAMDI, P.H. SHIPWAY and K.T. VOISEY, 2014. Applied Mechanics and Materials. 393, 888-892
  • ROBERTS A, SHIPWAY P and BROOKS R, 2014. Energy Conversion and Management. 82, 327-350
  • ROBERTS AP, BROOKS R, SHIPWAY P, GILCHRIST R and PEGG I, 2014. In: SAE 2014 World Congress & Exhibition: Detroit USA 8-10 April 2014.
  • CLARK, J.W.G., MCCARTNEY, D.G., SAGHAFIFAR, H., SHIPWAY, P.H., 2014. In: ASME 2014 Power Conference.
  • LEMM JD, WARMUTH AR, PEARSON SR, SHIPWAY PH, 2014. Tribology International.
  • A.L. MOHD TOBI, P.H. SHIPWAY and S.B. LEEN, 2013. Tribology International. 58, 29-39
  • D. ZHANG, S.J. HARRIS, D.G. MCCARTNEY, P.H. SHIPWAY and K.T. VOISEY, 2013. Materials Science and Technology. 29, 616-625
  • BENNETT, C.J., ATTALLAH, M.M., PREUSS, M., SHIPWAY, P.H., HYDE, T.H. and BRAY, S., 2013. Metallurgical and Materials Transactions A. 44(11), 5054-5064
  • WARMUTH, A.R., PEARSON, S.R., SHIPWAY, P.H. and SUN, W., 2013. Wear. 301(1-2), 491-500
  • S.R. PEARSON, P.H. SHIPWAY, J.O. ABERE and R.A.A. HEWITT, 2013. Wear. 303, 622-631
  • DAS BAKSHI S., SHIPWAY P.H., BHADESHIA H.K.D.H., 2013. Wear of Materials 2013.
  • ROBERTS A., BROOKS R., SHIPWAY P., DOMINY J., GILCHRIST R., HELLE-LORENTZEN R., 2013. Reducing thermal losses from automotive lubricant circuits during cold start by the application of polymer insulation: Institution of Mechanical Engineers - VTMS 2011, Vehicle Thermal Management Systems Conference Proceedings In:
  • KAMDI Z., SHIPWAY P.H., VOISEY K.T., 2013. Applied Mechanics and Materials.
  • HUANG, L., FOLKES, J., KINNELL, P. and SHIPWAY, P.H., 2012. Journal of Materials Processing Technology. 212(9), 1906-1915
  • DUNFORD, A.M., PARRY, A.R., SHIPWAY, P.H. and VINER, H.E., 2012. Wear. 292-293(July), 188-196
  • TANNER, D. W. J., CHALK, K., SUN, W., SHIPWAY, P. H. and HYDE, T. H., 2012. MATERIALS AT HIGH TEMPERATURES. 29(4), 359-367
  • HUSSAIN, T., MCCARTNEY, D. G. and SHIPWAY, P. H., 2012. MATERIALS SCIENCE AND TECHNOLOGY. 28(12), 1371-1378
  • BENNETT, C.J., HYDE, T.H. and SHIPWAY, P.H., 2011. Computational Materials Science. 50(9), 2592-2598
  • SHIPWAY, PH and GUPTA, K, 2011.
  • TOBI, ALM, SHIPWAY, PH and LEEN, SB, 2011.
  • CARPENTER, CR, SHIPWAY, PH and ZHU, Y, 2011.
  • CHALK, KM, SHIPWAY, PH and ALLEN, DJ, 2011. Science And Technology Of Welding And Joining. 16(7), 613-618
  • HUSSAIN, T., MCCARTNEY, D.G. and SHIPWAY, P.H., 2011. Surface and Coatings Technology. 205(21-22), 5021-5027
  • CARPENTER, C.R., SHIPWAY, P.H. and ZHU, Y., 2011. Surface and Coatings Technology. 205(21-22), 5059-5063
  • CARPENTER, CR, SHIPWAY, PH, ZHU, Y and WESTON, DP, 2011. Surface & Coatings Technology. 205(20), 4832-4837
  • MARROCCO, T, HUSSAIN, T, MCCARTNEY, DG and SHIPWAY, PH, 2011. Journal Of Thermal Spray Technology. 20(4), 909-917
  • TABBARA, H., GU, S., MCCARTNEY, D.G., PRICE, T.S. and SHIPWAY, P.H., 2011. Journal Of Thermal Spray Technology. 20(3), 608-620
  • HUSSAIN, T, MCCARTNEY, DG, SHIPWAY, PH and MARROCCO, T, 2011. Journal of thermal Spray Technology. 260-274
  • KAMDI, Z., SHIPWAY, P.H., VOISEY, K.T. and STURGEON, A.J., 2011. Wear. 271(9-10), 1264-1272
  • BENNETT, C.J., LEEN, S.B., WILLIAMS, E.J., SHIPWAY, P.H. and HYDE, T.H., 2010. Computational Materials Science. 50(1), 125-137
  • DU, J, WU, YQ, CHOY, KL and SHIPWAY, PH, 2010. Thin Solid Films. 519(4), 1293-1299
  • BOUD, F, CARPENTER, C, FOLKES, J and SHIPWAY, PH, 2010. Journal Of Materials Processing Technology. 210(15), 2197-2205
  • WESTON, DP, HARRIS, SJ, SHIPWAY, PH, WESTON, NJ and YAP, GN, 2010. Electrochimica Acta. 55(20), 5695-5708
  • DU, J, WU, YQ, CHOY, KL and SHIPWAY, PH, 2010. Applied Surface Science. 256(14), 4606-4611
  • WESTON, DP, HARRIS, SJ, CAPEL, H, AHMED, N, SHIPWAY, PH and YELLUP, JM, 2010. Transactions Of The Institute Of Metal Finishing. 88(1), 47-56
  • MOHD TOBI, A.L., DING, J., PEARSON, S., LEEN, S.B. and SHIPWAY, P.H., 2010. Tribology International. 43(10), 1917-1932
  • CHOKETHAWAI, K., MCCARTNEY, D. G. and SHIPWAY, P. H., 2009. Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings. VOL 480(NUMBER 2), 351-359
  • ZHANG, Y., SHIPWAY, P.H. and BOUE-BIGNE, F., 2009. Science and Technology of Welding and Joining. 14, 542-548
  • FOWLER, G., PASHBY, I. R. and SHIPWAY, P. H., 2009. The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V. VOL 266(NUMBER 7-8), 613-620
  • DING, J., LEEN, S.B., WILLIAMS, E.J. and SHIPWAY, P.H., 2009. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of Engineering Tribology. 223(7), 1019-1031
  • WESTON, D. P., SHIPWAY, P. H., HARRIS, S. J. and CHENG, M. K., 2009. Friction and sliding wear behaviour of electrodeposited cobalt and cobalt-tungsten alloy coatings for replacement of electrodeposited chromium. VOL 267(NUMBER 5-8), 934-943
  • SHIPWAY, P. H. and WESTON, D. P., 2009. Thermal effects in blasting and erosion of polymeric materials. VOL 209(NUMBER 20), 6161-6167
  • BAKSHI, S. R., WANG, D., PRICE, T., ZHANG, D., KESHRI, A. K., CHEN, Y., MCCARTNEY, D. G., SHIPWAY, P. H. and AGARWAL, A., 2009. Microstructure and wear properties of aluminum/aluminum-silicon composite coatings prepared by cold spraying. VOL 204(NUMBER 4), 503-510
  • SRINIVASU, D. S., AXINTE, D. A., SHIPWAY, P. H. and FOLKES, J., 2009. Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics. VOL 49(NUMBER 14), 1077-1088
  • MOHD TOBI, A.L., DING, J., BANDAK, G., LEEN, S.B. and SHIPWAY, P.H., 2009. Wear. 267(1-4), 270-282
  • DING, J., BANDAK, G., LEEN, S.B., WILLIAMS, E.J. and SHIPWAY, P.H., 2009. Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V. VOL 42(NUMB 11/12), 1651-1662
  • NAHVI, S. M., SHIPWAY, P. H. and MCCARTNEY, D. G., 2009. Particle motion and modes of wear in the dry sand-rubber wheel abrasion test. VOL 267(NUMBER 11), 2083-2091
  • EVERITT, N.M., DING, J., BANDAK, G., SHIPWAY, P.H., LEEN, S.B. and WILLIAMS, E.J., 2009. Wear. 267(1-4), 283-291
  • SHIPWAY, PH and WESTON, DP, 2009.
  • NAHVI, SM, SHIPWAY, PH and MCCARTNEY, DG, 2009.
  • DING, J, BANDAK, G, LEEN, SB, WILLIAMS, EJ and SHIPWAY, PH, 2009.
  • SRINIVASU, DS, AXINTE, DA, SHIPWAY, PH and FOLKES, J, 2009. International Journal Of Machine Tools & Manufacture. 49(14), 1077-1088
  • BAKSHI, SR, WANG, D, PRICE, T, ZHANG, D, KESHRI, AK, CHEN, Y, MCCARTNEY, DG, SHIPWAY, PH and AGARWAL, A, 2009. Surface & Coatings Technology. 204(4), 503-510
  • HUSSAIN, T., MCCARTNEY, D.G., SHIPWAY, P.H. and ZHANG, D., 2009. Journal of Thermal Spray Technology. 18(3), 364-379
  • ZHANG, Y, SHIPWAY, PH and BOUE-BIGNE, F, 2009. Science And Technology Of Welding And Joining. 14(6), 542-548
  • FOWLER, G, PASHBY, IR and SHIPWAY, PH, 2009. Wear. 266(7-8), 613-620
  • CHOKETHAWAI, K., MCCARTNEY, D.G. and SHIPWAY, P.H., 2009. Journal of Alloys and Compounds. 480(2), 351-359
  • WESTON, DP, SHIPWAY, PH, HARRIS, SJ and CHENG, MK, 2009.
  • TOBI, ALM, DING, J, BANDAK, G, LEEN, SB and SHIPWAY, PH, 2009.
  • NAHVI, SM, SHIPWAY, PH and MCCARTNEY, DG, 2009.
  • EVERITT, NM, DING, J, BANDAK, G, SHIPWAY, PH, LEEN, SB and WILLIAMS, EJ, 2009.
  • T.H. HYDE, W. SUN, A.A. BECKER, S.B. LEEN, P.H. SHIPWAY, Y. ZHANG, R.C. THOMSON, A.H. YAGHI and J. SANCHEZ-HANTON, 2009. A holistic approach to structural integrity of high temperature welds in power plants 4, 17-22
  • DING, J, LEEN, SB, WILLIAMS, EJ and SHIPWAY, PH, 2009. Proc. IMechE Part J: J. Engineering Tribology. 223, 1019-1031
  • BUCHANAN, V. E., MCCARTNEY, D. G. and SHIPWAY, P. H., 2008. A comparison of the abrasive wear behaviour of iron-chromium based hardfaced coatings deposited by SMAW and electric arc spraying WEAR -LAUSANNE-. VOL 264(NUMBER 7-8), 542-549
  • DING, J., LEEN, S.B, WILLIAMS, E.J. and SHIPWAY, P.H., 2008. Finite element simulation of fretting wear - fatigue interaction in spline couplings Tribology 鈥� Materials, Surfaces and Interfaces. 2, 10-24
  • MADGE, J.J., LEEN, S.B. and SHIPWAY, P.H., 2008. International Journal of Fatigue. 30(9), 1509-1528
  • ZHANG, D., HARRIS, S.J., MCCARTNEY, D.G., PASHBY, I.R., POWELL, J., SHIPWAY, P.H. and VOISEY, K.T., 2008. Materials Science and Engineering A: Structural Materials:Properties, Microstructure and Processing. 489(1-2), 273-284
  • BUCHANAN, V. E., SHIPWAY, P. H. and MCCARTNEY, D. G., 2007. WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 99-110
  • DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2007. POWDER METALLURGY. VOL 50(NUMB 1), 14-20
  • BANSAL, P., SHIPWAY, P.H. and LEEN, S.B., 2007. Acta Materialia. 55(15), 5089-5101
  • HOSKING, N.C., STR脰M, M.A., SHIPWAY, P.H. and RUDD, C.D., 2007. Corrosion Science. 49(9), 3669-3695
  • MADGE, J. J., LEEN, S. B. and SHIPWAY, P. H., 2007. WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 542-551
  • ZHANG Y, SHIPWAY P. H and HYDE T. H. AND SUN W., 2007. Anisotropy creep behaviour of P91 weld metal - a microstructural study In: Proc. of 3rd Int. Conf. on Integrity of High Temp. Welds, IoM London April 2007. 373-388
  • DING, J., MCCOLL, I. R., LEEN, S. B. and SHIPWAY, P. H., 2007. WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 481-491
  • SHIPWAY, P. H. and HOGG, J. J., 2007. WEAR -LAUSANNE-. VOL 263(NUMBER 7-12), 887-895
  • PRICE, T. S., SHIPWAY, P. H., MCCARTNEY, D. G., CALLA, E. and ZHANG, D., 2007. JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 16(NUMBER 4), 566-570
  • SHIPWAY, P. H., BROMLEY, J. P. and WESTON, D. P., 2007. WEAR -LAUSANNE-. VOL 263(NUMBER 1-6), 309-317
  • MADGE, J. J., LEEN, S. B., MCCOLL, I. R. and SHIPWAY, P. H., 2007. WEAR -LAUSANNE-. VOL 262(NUMBER 9-10), 1159-1170
  • BANSAL, P., SHIPWAY, P.H. and LEEN, S.B., 2007. Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials. 221, 285-297
  • CALLA, E., MCCARTNEY, D.G. and SHIPWAY, P.H., 2006. Journal of Thermal Spray Technology. 15(2), 255-262
  • MARROCCO, T., MCCARTNEY, D.G., SHIPWAY, P.H. and STURGEON, A.J., 2006. Journal of Thermal Spray Technology. 15(2), 263-272
  • PRICE, T. S., SHIPWAY, P. H. and MCCARTNEY, D. G., 2006. JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 15(NUMB 4), 507-512
  • BANSAL, P., SHIPWAY, P. H. and LEEN, S. B., 2006. JOURNAL OF THERMAL SPRAY TECHNOLOGY. VOL 15(NUMB 4), 570-575
  • BANSAL, P., SHIPWAY, P. H. and LEEN, S. B., 2006. Surface and Coatings Technology. VOL 200(NUMBER 18-19), 5318-5327
  • BANSAL, P., SHIPWAY, P.H., LEEN, S.B. and DRIVER, L.C., 2006. Materials Science & Engineering. A, Structural materials: properties, microstructures and processing. 430(1-2), 104-112
  • HARRIS, S. J., WESTON, D. P. and SHIPWAY, P. H., 2006. Development of Nanostructured Coatings for Advanced Engineering Applications VDI BERICHTE. VOL 1940, 75-80
  • HORLOCK, A.J., SADEGHIAN, Z., MCCARTNEY, D.G. and SHIPWAY, P.H., 2005. Journal of Thermal Spray Technology. 14(1), 77-84
  • ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2005. Journal of Thermal Spray Technology. 14(1), 109-116
  • SHIPWAY, P. H., MCCARTNEY, D. G. and SUDAPRASERT, T., 2005. Wear. VOL 259(NO 7/12), 820-827
  • DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2005. Journal of Materials Science. VOL 40(NUMBER 15), 4117-4119
  • FOWLER, G., SHIPWAY, P.H. and PASHBY, I.R., 2005. Journal of Materials Processing Technology. 161(3), 407-414
  • FOWLER, G., SHIPWAY, P.H. and PASHBY, I.R., 2005. Journal of Materials Processing Technology. 159(3), 356-368
  • WESTON, D.P., SHIPWAY, P.H. and HARRIS, S.J., 2005. Wear. 258(1-4), 392-401
  • DINELLI, F., LEGGETT, G.J. and SHIPWAY, P.H., 2005. Nanotechnology. 16(6), 675-682
  • CHEN, H., XU, C., QU, J., HUTCHINGS, I. M., SHIPWAY, P. H. and LIU, J., 2005. Wear. VOL 259(NO 7/12), 801-806
  • SHIPWAY, P. H. and HOGG, J. J., 2005. Wear. VOL 259(NO 1/6), 44-51
  • SHIPWAY, P. H. and HOWELL, L., 2005. Wear. VOL 258(NO 1-4), 303-312
  • CHEN, H., XU, C., ZHOU, Q., HUTCHINGS, I. M., SHIPWAY, P. H. and LIU, J., 2005. Wear. VOL 258(NO 1-4), 333-338
  • SHIPWAY, P. H., SCOTCHFORD, C. A., SIM, B., MCCARTNEY, D. G. and ZHANG, D., 2004. Improved Titanium Coatings for Biomedical Applications Using Cold Gas Spraying WORLD BIOMATERIALS CONGRESS. CONF 7, 787
  • DEGNAN, C. C., KENNEDY, A. R. and SHIPWAY, P. H., 2004. Journal of Materials Science. VOL 39(NUMBER 7), 2605-2607
  • DEGNAN, C.C., SHIPWAY, P.H. and KENNEDY, A.R., 2004. Materials Science and Technology. 20(6), 731-738
  • ZARRINFAR, N., KENNEDY, A.R. and SHIPWAY, P.H., 2004. Scripta Materialia. 50(7), 949-952
  • STALLARD, J., MERCS, D., JARRATT, M., TEER, D. G. and SHIPWAY, P. H., 2004. Surface and Coatings Technology. VOL 177-178(NUMBER), 545-551
  • SHIPWAY, P. H., 2004. Wear. VOL 257(NUMBER 9-10), 984-991
  • BEAKE, B. D., SHIPWAY, P. H. and LEGGETT, G. J., 2004. Wear. VOL 256(NUMBER 1-2), 118-125
  • CALLA, E., MCCARTNEY, D. G. and SHIPWAY, P. H., 2004. Deposition of Copper by Cold Gas Dynamic Spraying: An Investigation of Dependence of Microstructure and Properties of the Deposits on the Spraying Conditions THERMAL SPRAY -PROCEEDINGS-. YEAR, 352-357
  • SUDAPRASERT, T., SHIPWAY, P.H. and MCCARTNEY, D.G., 2003. Wear. 255(7-12), 943-949
  • LOTFI, B., SHIPWAY, P. H., MCCARTNEY, D. G. and EDRIS, H., 2003. Wear. VOL 254(NUMBER 3-4), 340-349
  • DEGNAN, C.C., KENNEDY, A.R. and SHIPWAY, P.H., 2003. Powder Metallurgy. 46(4), 365-370
  • ZARRINFAR, N., KENNEDY, A. R., SHIPWAY, P. H. and SAIDI, A., 2003. Powder Metallurgy. VOL 46(PART 2), 154-158
  • CAPEL, H., SHIPWAY, P.H. and HARRIS, S.J., 2003. Wear. 255(7-12), 917-923
  • DRIVER, L.C., SHIPWAY, P.H., MCCARTNEY, D.G., DONOHUE, L.A. and RICKERBY, D.S., 2003. Acoustic Emission as a Tool for Characterizing HVOF-Sprayed WC-Co Coatings In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 810-807
  • HYDE,T.H., SUN,W., AGYAKWA,P., SHIPWAY,P.H. and WILLIAMS,J.A., 2003. Anisotropic creep and fracture behaviour of a 9CrMoN6V weld metal at 650?C. In: SKRZYPEK, J. and GANCZARSKI, A.W., eds., Anisotropic Behaviour of Damaged Materials Springer-Verlag, Heidelberg.
  • HYDE,T.H., SUN,W., AGYAKWA,P.A., SHIPWAY,P.H. and WILLIAMS,J.A., 2003. Anisotropic creep and fracture behaviour of a 9CrMoN6V weld metal at 650?C. In: J.J. SKRZYPEK, J.J. and GANCZARSKI, A.W., eds., Anisotropic Behaviour of Damaged Materials Chapter 9. Springer-Verlag, Heidelberg. 295-316
  • ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2003. Particle-substrate interactions in cold gas dynamic spraying In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 45-52
  • HORLOCK, A.J., SADEGHIAN, Z., MCCARTNEY, D.G. and SHIPWAY, P.H., 2003. HVOF reactive spraying of mechanically alloyed Ni-Ti-C powders In: Thermal Spray 2003: Advancing the Science and Applying the Technology. 335-342
  • SHIPWAY, P., FOWLER, G. and PASHBY, I.R., 2003. Characteristics of the Surface of a Titanium Alloy Following Milling with Abrasive Waterjets In: International Conference on Abrasive and Erosive Wear.
  • HYDE, T. H., SUN, W., AGYAKWA, P. A., SHIPWAY, P. H. and WILLIAMS, J. A., 2003. Anisotropic Creep and Fracture Behaviour of a 9CrMoNbV Weld Metal at 650^oC LECTURE NOTES IN APPLIED AND COMPUTATIONAL MECHANICS. VOL 9, 295-316
  • SHIPWAY, P. H. and NGAO, N. K., 2003. Wear. VOL 255(NUMBER 1-6), 742-750
  • HORLOCK, A.J., MCCARTNEY, D.G., SHIPWAY, P.H. and WOOD, J.V., 2002. Materials Science and Engineering. A, Structural materials: properties, microstructures and processing. 336(1-2), 88 - 98
  • ZARRINFAR,N., SHIPWAY,P.H., KENNEDY,A.R. and SAIDI,A., 2002. Scripta Materialia. 46(2), 121-126
  • DEGNAN, C. C. and SHIPWAY, P. H., 2002. WEAR -LAUSANNE-. VOL 252(NUMBER 9-10), 832-841
  • ZHANG, D., SHIPWAY, P.H. and MCCARTNEY, D.G., 2002. The effect of processing variables on deposition characteristics of aluminium by cold gas dynamic spraying In: Proc. 3rd Int. Conf. Surface Eng.. 105-110
  • HYDE, T.H., SUN, P., AGYAKWA, P., SHIPWAY, P. and WILLIAMS, J.A., 2002. Anisotropic creep and fracture behaviour of a 9CrMoNbV Weld Metal at 650搂C In: CONFERENCE ON ANISOTROPIC BEHAVIOUR OF DAMAGED MATERIALS (ABDM). 1-22
  • SUDAPRASERT, T., MCCARTNEY, D.G. and SHIPWAY, P.H., 2002. Role of spray system and powder feedstock on sliding wear behaviour of WC-Co HVOF sprayed coatings In: Proc. Int. Thermal Spray Conf. 494-499
  • CAPEL, H., SHIPWAY, P.H. and HARRIS, S.J., 2002. Enhancement of Co-W electrodeposits on cast iron and steel substrates by use of a cobalt strike In: Proc. AESF SUR/FIN, American Electroplaters and Surface Finishers Society. 123-132
  • DEGNAN, C.C. and SHIPWAY, P.H., 2002. Metallurgical and Materials Transactions. A, Physical metallurgy and materials science. 33A(9), 2973-2984
  • DEGNAN, C. C. and SHIPWAY, P. H., 2002. Materials Science and Technology. VOL 18(PART 10), 1156-1162
  • BUCHANAN, F. J. and SHIPWAY, P. H., 2002. Biomaterials. VOL 23(NUMBER 1), 93-100
  • SHIPWAY, P. H. and WIROJANUPATUMP, S., 2002. Tribology International. VOL 35(NUMBER 10), 661-667
  • JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2001. Wear. VOL 249(NO 3-4), 246-253
  • WIROJANUPATUMP, S., SHIPWAY, P. H. and MCCARTNEY, D. G., 2001. Wear. VOL 249(NUMBER 9), 829-837
  • DEGNAN, C. C., SHIPWAY, P. H. and WOOD, J. V., 2001. Wear. VOL 251(NUMBER 1-12), 1444-1451
  • BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 2001. Surface and Interface Analysis. VOL 31(PART 1), 39-45
  • BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 2001. Polymer. VOL 42(NUMBER 16), 7025-7031
  • JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2001. WEAR -LAUSANNE-. VOL 251(NUMBER 1-12), 1009-1016
  • BLATCHFORD, M. T., JONES, M., HORLOCK, A. J., MCCARTNEY, D. G., SHIPWAY, P. H. and WOOD, J. V., 2001. Improvements in HVOF Sprayed Cermet Coatings Produced from SHS Powders THERMAL SPRAY -PROCEEDINGS-. 2001, 221-230
  • SHIPWAY, P.H., 2000. Production and Characterisation of HVOF Sprayed NiCr-TiC Coatings using SHS Powder Feedstock In: 1st International Thermal Spray Conference 2000. 515-522
  • JONES, M., HORLOCK, A. J., SHIPWAY, P. H., MCCARTNEY, D. G. and WOOD, J. V., 2000. Abrasive wear behaviour of FeCr-TiC coatings deposited by HVOF spraying of SHS powders VTT SYMPOSIUM. VOL 200, 77-86
  • WIROJANUPATUMP, S. and SHIPWAY, P. H., 2000. Wear. VOL 239(NUMBER 1), 91-101
  • SHIPWAY, P.H., 2000. The Role of Substrate Temperature during HVOF Spraying in Coating Residual Stress State and Abrasive Wear Performance In: 9th Nordic Symposium on Tribology (Nortrib2000). 990-999
  • SHIPWAY, P. H. and HODGE, C. J., 2000. WEAR -LAUSANNE-. VOL 237(NUMBER 1), 90-97
  • STEWART, D.A., SHIPWAY, P.H. and MCCARTNEY, D.G., 1999. Wear. VOL 225/229(NUMBER 2), 789-798
  • SHIPWAY, P.H., 1999. Microabraision of Glass - The Interrelated Effects of Load and Abrasive Slurry Viscosity In: 21st Meeting of the IRG-OECD Group on Wear of Materials.
  • SHIPWAY, P.H., 1999. WEAR -LAUSANNE-. VOL 233-235(NUMBER 1), 191-199
  • SHIPWAY, P.H., 1999. Wear. 233-235, 191-199
  • SHIPWAY, P. H., 1999. The role of test conditions on the microabrasive wear behaviour of soda-lime glass PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON EROSION BY LIQUID AND SOLID IMPACT. 9TH, 191-199
  • WIROJANUPATUMP, S. and SHIPWAY, P. H., 1999. A direct comparison of wet and dry abrasion behaviour of mild steel PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON EROSION BY LIQUID AND SOLID IMPACT. 9TH, 655-665
  • WIROJANUPATUMP, S. and SHIPWAY, P.H., 1999. WEAR -LAUSANNE-. VOL 233-235(NUMBER 1), 655-665
  • BEAKE, B. D., LEGGETT, G. J. and SHIPWAY, P. H., 1999. SURFACE AND INTERFACE ANALYSIS. VOL 27(NUMBER 12), 1084-1091
  • SHIPWAY, P. H., KENNEDY, A. R. and WILKES, A. J., 1998. Wear. VOL 216(ISSUE 2), 160-171
  • STEWART, D. A., SHIPWAY, P. H. and MCCARTNEY, D. G., 1998. Surface and Coatings Technology. VOL 105(ISSUE 1-2), 13-24
  • REES, G. I. and SHIPWAY, P. H., 1997. MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 223(NUMBER 1/2), 168-178
  • SHIPWAY, P. H., WOOD, S. J. and DENT, A. H., 1997. Wear. VOL 203/204(NUMBER COM), 196-205
  • SHIPWAY, P. H., 1997. Wear. VOL 205(NUMBER 1/2), 169-177
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1996. WEAR -LAUSANNE-. VOL 193(NUMBER 1), 105-113
  • SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1995. MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 201(NUMBER 1/2), 143
  • SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1995. Mechanical stabilisation of bainite MATERIALS SCIENCE AND TECHNOLOGY -LONDON-. VOL 11(NUMBER 11), 1116-1128
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1995. SURFACE AND COATINGS TECHNOLOGY. VOL 71(NUMBER 1), 1
  • SHIPWAY, P. H. and BHADESHIA, H. K. D. H., 1994. MATERIALS SCIENCE AND ENGINEERING -LAUSANNE- A. VOL 223(NUMBER 1/2), 179-185
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1994. WEAR -LAUSANNE-. VOL 174(NUMBER 1/2), 169
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. PHILOSOPHICAL MAGAZINE A. VOL 67(NUMBER 6), 1389
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. POWDER TECHNOLOGY -LAUSANNE-. VOL 76(NUMBER 1), 23
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. WEAR -LAUSANNE-. VOL 162/164(NUMBER A), 148
  • HUTCHINGS, I. and SHIPWAY, P., 1993. 93NM033 Improved Method of Testing Durability and Adhesion of Paints and Other Coatings ISATA -PROCEEDINGS-. 26th, 165-170
  • SHIPWAY, P. H. and HUTCHINGS, I. M., 1993. PHILOSOPHICAL MAGAZINE A. VOL 67(NUMBER 6), 1405
  • ZHANG, D., HARRIS, S. J., MCCARTNEY, D. G., SHIPWAY, P. H. and VOISEY, K. T., MATERIALS SCIENCE AND TECHNOLOGY. 29(5), 616-625
  • TOBI, A. L. MOHD, SHIPWAY, P. H. and LEEN, S. B., TRIBOLOGY INTERNATIONAL. 58, 29-39

Faculty of Engineering

The 糖心原创
University Park
Nottingham, NG7 2RD



Contacts: Please see our 'Contact us' page