糖心原创

Faculty of Engineering
 

Image of Mirco Magnini

Mirco Magnini

Associate Professor, Faculty of Engineering

Contact

Biography

I am an Associate Professor in the Department of Mechanical, Materials and Manufacturing Engineering at the 糖心原创. I received a Master Degree in Mechanical Engineering from the University of Bologna, Italy, and a PhD in Energy Engineering from the same institution in 2012. From 2013 to 2017 I was a post-doc research assistant at the Laboratory of Heat and Mass Transfer, EPFL, Switzerland, where our research into numerical and theoretical modelling of microchannel flow boiling was funded by the Swiss National Science Foundation. Prior to joining the UoN, I was a post-doc research associate in the Chemical Engineering Dept of Imperial College London where I worked on the numerical modelling of wax deposition in crude oil flows.

I am a member and vice-Chair of the Virtual International Research Institute of Two-Phase Flow and Heat Transfer (), a portal where many international labs share their experimental and numerical data for two-phase flows and heat transfer, and where I curate an open-access tutorial on OpenFOAM.

I am Associate Editor for Elsevier's International Journal of Thermal Sciences (), a member of the Physical Sciences Working Group at the European Space Agency, and a member of the Thermofluids group at IMechE.

Google scholar:

Researchgate:

Linkedin:

My personal Youtube channel:

Expertise Summary

My research activity focuses on the investigation of the many fundamental mechanisms and phenomena governing multiphase flows, heat transfer, phase change and phase separation in confined geometries. My field of expertise spans across:

  • Multiphase flows (both macro and microscale)
  • Heat transfer
  • Phase change/separation
  • Thermo-fluid dynamics
  • Multiphase computational fluid dynamics
  • Use/development of CFD tools (ANSYS Fluent, Openfoam, Basilisk, in-house codes in Matlab/Python)
  • Theoretical modelling of thin film flows and solution of the resulting ODEs

Teaching Summary

Modules that I am currently teaching:

  • MMME3086 Computer Modelling Techniques (convenor: Dr Mirco Magnini)

  • MMME2047 Thermodynamics & Fluid Mechanics 2 (convenor: Dr Don Giddings)

Research Summary

Boiling flows in microchannel evaporators

Heat and mass transport in microchannels is key to diverse applications that span many disciplines in science and engineering, from mechanical, chemical, energy, and environmental engineering, to biological and medical science. My research in this field aims to characterise the fluid mechanics and heat transfer associated with long gas bubbles propagating in noncircular channels in both adiabatic and diabatic (boiling) conditions, using a combination of theoretical and computational methods; check out our most recent publications:

  • F. Municchi et al., Appl. Therm. Eng. 238 (2024) 122039.
  • Darshan M. B. et al., Appl. Therm. Eng. 257 (2024) 124464.

This research was funded by a 拢1.6M EPSRC grant () with Imperial College and Brunel University. You can find some videos of our simulations in this research area in my .

Boiling flows in micro-pin-fin evaporators

Micro-pin-fin evaporators represent an alternative geometry to multi-microchannel evaporators as compact and efficient solutions to dissipate heat from high power-density devices. In micro-pin-fin evaporators, the fluid flows through a gap where cylindrical obstacles are positioned in a cross-flow arrangement. However, while the dynamics of bubbles is relatively well established for straight channels, very little is known about how bubbles propagate in these complex geometries. PhD student Ismail El Mellas is currently working on developing numerical models in OpenFOAM to tackle this problem. You can find some videos of our simulations in this research area in my , check out his most recent publications:

  • I. El Mellas et al., Int J Multiphase Flow 163 (2023) 104443.
  • I. El Mellas et al., Int J Heat Mass Transf 228 (2024) 125620.

Hybrid atomistic-continuum simulations of boiling

The next generation of science depends on solving the problem of linking simulations at different scales. In many physical processes, phenomena happening at the molecular scale determine the large-scale dynamics of the system. Boiling represents one such problem, where bubbles nucleating at the nanoscale depart from hot surfaces owing to fluid dynamics forces originating from millimetre-scale flow structures. To date, there is no existing modelling framework that can simultaneously capture all the relevant scales of this flow, that require molecular dynamics simulations at the nanoscale coupled with traditional continuum-scale techniques based on the control-volume formulation of the Navier-Stokes equations. In a collaboration with Brunel University London (), funded by an eCSE-ARCHER2 grant, we have recently coupled LAMMPS and OpenFOAM to perform multiscale simulations of boiling with a MD-CFD domain decomposition technique.

  • M. Magnini, G. Gennari, E. R. Smith, G. J. Pringle, Coupling LAMMPS and OpenFOAM for Multi-Scale Models, free ARCHER2 webinar delivered on 19/07/2023.
  • G. Gennari et al., Int J Therm Sci 200 (2024) 108954.

Bubbles and evaporation microlayer dynamics upon nucleate boiling

We study the dynamics of bubbles and of the thin layer of liquid that remains trapped underneath a bubble when this grows quickly over a heated wall, at conditions typically encountered in nucleate boiling. You can find some videos of our simulations in this research area in my . Check out our most recent publications:

  • X. Zhang et al., J Fluid Mech 997 (2024) A44.
  • X. Zhang et al., Int J Multiphase Flow 183 (2024) 105049.

Numerical simulation of annular flows in turbulent regime

In collaboration with the University of Padova and Delft University, we are developing numerical methods to study the dynamics of annular flows in mm-sized channels. The fast gas core at the channel centre is turbulent and thus requires development of suitable two-phase turbulence models. In the work below, we have used a RANS method based on the k-omega model with turbulence damping and have obtained excellent agreement with in-house experiments:

  • E. Zanetti et al., Int J Thermofluids 24 (2024) 100871.

Two-phase flows in millimetric channels

We are studying the dynamics of thin films and long bubbles transported in channels of mm-size, in a regime where viscous, capillary and buoyancy effects all play a role. Within horizontal channels, buoyancy effects elevate the bubble above the channel centreline and tend to ovalize the bubble cross-section. In vertical channels, interesting different dynamics are observed depending on the direction of the bulk liquid flow. You can find some videos of our simulations in this research area in my . Our most recent publications are available here:

  • J. A. Cranmer et al., Int J Multiph Flow 181 (2024) 105019.
  • M. Magnini, M. A. Herrada, Phys Rev Fluids 10 (2025) 053603.

Recent Publications

  • XIAOLONG ZHANG, ISMAIL EL MELLAS, NICOLA ANDREINI and MIRCO MAGNINI, 2025. International Journal of Multiphase Flow. 183, 105049
  • CIONCOLINI, ANDREA and MAGNINI, MIRCO, 2025. PHYSICS OF FLUIDS. 37(2),
  • MIRCO MAGNINI and MIGUEL A. HERRADA, 2025. Physical Review Fluids. 10, 053603
  • CRANMER, JAKUB A., SHARABORIN, EVGENII, KHODAPARAST, SEPIDEH, GIUSTINI, GIOVANNI and MAGNINI, MIRCO, 2024. International Journal of Multiphase Flow. 181, 105019

Future Research

I welcome enquiries from potential PhD candidates and post-doctoral researchers from Home, EU and international countries who are interested in the following research areas: multiphase flows, microscale flows, computational methods for two-phase flows, thermal management of electronics, oil & gas.

The following funding opportunities are available for talented prospective PhD students and post-docs:

  • Nottingham Research Fellowships link

  • UoN's International research scholarships link

  • Marie-Curie individual fellowships

  • Royal Society's fellowships:

Other useful info and links available here: /engineering/funding/postgraduate/index.aspx

  • XIAOLONG ZHANG, ISMAIL EL MELLAS, NICOLA ANDREINI and MIRCO MAGNINI, 2025. International Journal of Multiphase Flow. 183, 105049
  • CIONCOLINI, ANDREA and MAGNINI, MIRCO, 2025. PHYSICS OF FLUIDS. 37(2),
  • MIRCO MAGNINI and MIGUEL A. HERRADA, 2025. Physical Review Fluids. 10, 053603
  • CRANMER, JAKUB A., SHARABORIN, EVGENII, KHODAPARAST, SEPIDEH, GIUSTINI, GIOVANNI and MAGNINI, MIRCO, 2024. International Journal of Multiphase Flow. 181, 105019
  • M.B., DARSHAN, MAGNINI, M. and MATAR, O.K., 2024. Applied Thermal Engineering. 257, 124464
  • ZHANG, XIAOLONG, EL MELLAS, ISMAIL and MAGNINI, MIRCO, 2024. Journal of Fluid Mechanics. 997,
  • EL MELLAS, I., SAMKHANIANI, N., FALSETTI, C., STROH, A., ICARDI, M. and MAGNINI, M., 2024. International Journal of Heat and Mass Transfer. 228, 125620
  • GENNARI, GABRIELE, SMITH, EDWARD R., PRINGLE, GAVIN J. and MAGNINI, MIRCO, 2024. International Journal of Thermal Sciences. 200, 108954
  • MUNICCHI, F., MARKIDES, C.N., MATAR, O.K. and MAGNINI, M., 2024. Applied Thermal Engineering. 238, 122039
  • MARK SCHEPPERLE, NIMA SAMKHANIANI, MIRCO MAGNINI and PETER WOIAS, 2024. ASME Journal of Heat and Mass Transfer. 146, 031801
  • EMANUELE ZANETTI, ARIANNA BERTO, STEFANO BORTOLIN, MIRCO MAGNINI and DAVIDE DEL COL, 2024. International Journal of Thermofluids. 24, 100871
  • BISTEROV, I., ABAYZEED, S., SPEIDEL, A., MAGNINI, M., ZUBAYR, M. and CLARE, A. T., 2023. Journal of Materials Processing Technology. 311,
  • EL MELLAS, I., MUNICCHI, F., ICARDI, M. and MAGNINI, M., 2023. International Journal of Multiphase Flow. 163,
  • MAGNINI, M., MUNICCHI, F., EL MELLAS, I. and ICARDI, M., 2022. International Journal of Multiphase Flow. 148,
  • GROTH, J. H., MAGNINI, M., TUCK, C. and CLARE, A., 2022. Additive Manufacturing. 55,
  • MUNICCHI, F., EL MELLAS, I., MATAR, O. K. and MAGNINI, M., 2022. International Journal of Heat and Mass Transfer. 195,
  • MAGNINI, M. and MUNICCHI, F., 2022.
  • MORAN, H. R., MAGNINI, M., MARKIDES, C. N. and MATAR, O. K., 2021. International Journal of Multiphase Flow. 135,
  • VAN ROOIJ, S., MAGNINI, M., MATAR, O. K. and HAUSSENER, S., 2021. Applied Thermal Engineering. 186,
  • YU, Y. E., MAGNINI, M., ZHU, L., SHIM, S. and STONE, H. A., 2021. Journal of Fluid Mechanics. 911,
  • LAVINO, ALESSIO D., SMITH, EDWARD, MAGNINI, MIRCO and MATAR, OMAR K., 2021. LANGMUIR. 37(18), 5731-5744
  • PAUL, SOUMYADEEP, HSU, WEI-LUN, MAGNINI, MIRCO, MASON, LACHLAN R., ITO, YUSUKE, HO, YA-LUN, MATAR, OMAR K. and DAIGUJI, HIROFUMI, 2021. JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY. 16(1),
  • HAMAMI BISSOR, E., MAGNINI, M., ULLMANN, A. and BRAUNER, N., 2021. Journal of Natural Gas Science and Engineering. 95,
  • GROTH, J. H., ANDERSON, C., MAGNINI, M., TUCK, C. and CLARE, A., 2021. Additive Manufacturing.
  • CIONCOLINI, A. and MAGNINI, M., 2021. Fluids. 6(12),
  • MAGNINI, M. and MATAR, O. K., 2020. International Journal of Multiphase Flow. 129,
  • MAGNINI, M. and MATAR, O. K., 2020. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 150,
  • PAUL, SOUMYADEEP, HSU, WEI-LUN, MAGNINI, MIRCO, MASON, LACHLAN R., HO, YA-LUN, MATAR, OMAR K. and DAIGUJI, HIROFUMI, 2020. PHYSICAL REVIEW RESEARCH. 2(4),
  • BATCHVAROV, A., KAHOUADJI, L., MAGNINI, M., CONSTANTE-AMORES, C. R., SHIN, S., CHERGUI, J., JURIC, D., CRASTER, R., V and MATAR, O. K., 2020. PHYSICAL REVIEW FLUIDS. 5(9),
  • MAGNINI, M., KHODAPARAST, S., MATAR, O. K., STONE, H. A. and THOME, J. R., 2019. PHYSICAL REVIEW FLUIDS. 4(2),
  • MAGNINI, M. and MATAR, O. K., 2019. Industrial and Engineering Chemistry Research.
  • MAGNINI, M., ULLMANN, A., BRAUNER, N. and THOME, J. R., 2018. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING. 166, 1000-1017
  • FERRARI, ANDREA, MAGNINI, MIRCO and THOME, JOHN R., 2018. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 123, 928-944
  • FALSETTI, C., MAGNINI, M. and THOME, J. R., 2018. APPLIED THERMAL ENGINEERING. 130, 1425-1439
  • FALSETTI, C., MAGNINI, M. and THOME, J. R., 2018. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 122, 967-982
  • MAGNINI, M., BEISEL, A. M., FERRARI, A. and THOME, J. R., 2017. ADVANCES IN WATER RESOURCES. 109, 84-93
  • FALSETTI, C., MAGNINI, M. and THOME, J. R., 2017. Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator PROCEEDINGS OF THE SIXTEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017. 736-743
  • MAGNINI, M., FERRARI, A., THOME, J. R. and STONE, H. A., 2017. PHYSICAL REVIEW FLUIDS. 2(8),
  • FALSETTI, C., MAGNINI, M. and THOME, J. R., 2017. JOURNAL OF ELECTRONIC PACKAGING. 139(3),
  • MAGNINI, M. and THOME, J. R., 2017. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 91, 296-314
  • FERRARI, ANDREA, MAGNINI, MIRCO and THOME, JOHN R., 2017. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 91, 276-295
  • FALSETTI, C., JAFARPOORCHEKAB, H., MAGNINI, M., BORHANI, N. and THOME, J. R., 2017. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 107, 805-819
  • SCAMMELL, ALEX, KIM, JUNGHO, MAGNINI, MIRCO and THOME, JOHN R., 2016. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 99, 904-917
  • MAGNINI, M. and THOME, J. R., 2016. INTERNATIONAL JOURNAL OF THERMAL SCIENCES. 110, 119-136
  • MAGNINI, M., PULVIRENTI, B. and THOME, J. R., 2016. APPLIED MATHEMATICAL MODELLING. 40(15-16), 6811-6830
  • MAGNINI, MIRCO and THOME, JOHN R., 2016. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME. 138(2),
  • MAGNINI, MIRCO and THOME, JOHN R., 2015. USE OF TWO-PHASE CFD SIMULATIONS TO DEVELOP A BOILING HEAT TRANSFER PREDICTION METHOD FOR SLUG FLOW WITHIN MICROCHANNELS INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, 2015, VOL 3.
  • KHODAPARAST, S., MAGNINI, M., BORHANI, N. and THOME, J. R., 2015. MICROFLUIDICS AND NANOFLUIDICS. 19(1), 209-234
  • SZCZUKIEWICZ, S., MAGNINI, M. and THOME, J. R., 2014. INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 59, 84-101
  • MAGNINI, M., PULVIRENTI, B. and THOME, J. R., 2013. INTERNATIONAL JOURNAL OF THERMAL SCIENCES. 71, 36-52
  • MAGNINI, M., PULVIRENTI, B. and THOME, J. R., 2013. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. 59, 451-471
  • MAGNINI, M. and PULVIRENTI, B., 2011. Height function interface reconstruction algorithm for the simulation of boiling flows WIT Transactions on Engineering Sciences. 70, 69-80

Faculty of Engineering

The 糖心原创
University Park
Nottingham, NG7 2RD



Contacts: Please see our 'Contact us' page