SITHOLE, K., TAYLOR, C. L., ROUSE, J. P. and HYDE, C. J., 2023. Materials and Design. 226,
KONG, Y., BENNETT, C. J. and HYDE, C. J., 2022. Tribology International. 165,
ENGEL, B., HUTH, M. and HYDE, C., 2022. Crystals. 12(1),
SANCHEZ, S., GASPARD, G., HYDE, C. J., ASHCROFT, I. A., RAVI, G. A. and CLARE, A. T., 2022. Materials Science and Engineering A. 841,
SANCHEZ, S., GASPARD, G., HYDE, C. J., ASHCROFT, I. A., RAVI, G. A. and CLARE, A. T., 2022. Materials Science and Engineering A. 841,
HYDE, C. and BARNARD, P., 2022. Materials at High Temperatures.
GULLANE, A., MURRAY, J. W., HYDE, C. J., SANKARE, S., EVIRGEN, A. and CLARE, A. T., 2022. Additive Manufacturing. 59,
GULLANE, A., MURRAY, J. W., HYDE, C. J., SANKARE, S., EVIRGEN, A. and CLARE, A. T., 2022. Additive Manufacturing. 59,
LAVIE, W. J., ROUSE, J. P. and HYDE, C. J., 2022. Experimental Mechanics.
SANCHEZ, S., HYDE, C. J., ASHCROFT, I. A., G.A, R. and CLARE, A. T., 2021. Additive Manufacturing. 41,
CLARE, A., GULLANE, A., HYDE, C., MURRAY, J. W., SANKARE, S. and WITS, W. W., 2021. CIRP Annals.
SANCHEZ, S., GASPARD, G., HYDE, C. J., ASHCROFT, I. A., RAVI, G. A. and CLARE, A. T., 2021. Materials and Design. 204,
SANCHEZ, S., SMITH, P., XU, Z., GASPARD, G., HYDE, C. J., WITS, W. W., ASHCROFT, I. A., CHEN, H. and CLARE, A. T., 2021. International Journal of Machine Tools and Manufacture. 165,
KAZAKEVICIUTE, J., ROUSE, J. P., FOCATIIS, D. and HYDE, C., 2021. Journal of Strain Analysis for Engineering Design.
LEIDERMARK, D., ROUSE, J., ENGEL, B., HYDE, C., PATTISON, S. and STEKOVIC, S., 2021. Computational Materials Science. 198,
GULLANE, A., MURRAY, J. W., HYDE, C. J., SANKARE, S., EVIRGEN, A. and CLARE, A. T., 2021. Materials and Design. 212,
JONES, J., WHITTAKER, M., LANCASTER, R., HYDE, C., ROUSE, J., ENGEL, B., PATTISON, S., STEKOVIC, S., JACKSON, C. and LI, H. Y., 2020. International Journal of Fatigue. 135,
ROUSE, J. P., ENGEL, B., HYDE, C. J., PATTISON, S. J., WHITTAKER, M. T., JONES, J. P., COCKINGS, B. and BARNARD, N. C., 2020. International Journal of Fatigue. 136,
SI, Y., ROUSE, J. P. and HYDE, C. J., 2020. International Journal of Fatigue. 136,
ENGEL, B., ROUSE, J. P., HYDE, C. J., LAVIE, W., LEIDERMARK, D., STEKOVIC, S., WILLIAMS, S. J., PATTISON, S. J., GRANT, B., WHITTAKER, M. T., JONES, J. P., LANCASTER, R. J. and LI, H. Y., 2020. International Journal of Fatigue. 137,
STEKOVIC, S., JONES, J. P., ENGEL, B., WHITTAKER, M. T., NORMAN, V., ROUSE, J. P., PATTISON, S., HYDE, C. J., H脛RNMAN, P., LANCASTER, R. J., LEIDERMARK, D. and MOVERARE, J., 2020. International Journal of Fatigue. 138,
KONG, Y., BENNETT, C. J. and HYDE, C. J., 2020. Materials and Design. 196,
ROUSE, J. P., SIMONELLI, M. and HYDE, C. J., 2020. Additive Manufacturing. 36,
KAZAKEVICIUTE, J., ROUSE, J. P., DE FOCATIIS, D. S. A. and HYDE, C. J., 2019. Theoretical and Applied Fracture Mechanics. 99, 131-139
KAZAKEVICIUTE, J., ROUSE, J. P., DE FOCATIIS, D. S. A. and HYDE, C. J., 2019. Theoretical and Applied Fracture Mechanics. 99, 131-139
BARRETT, R. A., HYDE, C. J., O'DONOGHUE, P. E. and LEEN, S. B., 2019. International Journal of Fatigue. 126, 335-345
XU, Z., HYDE, C. J., TUCK, C. and CLARE, A. T., 2018. Journal of Materials Processing Technology. 256, 13-24
WING CHEONG, M. F. L., ROUSE, J. P., HYDE, C. J. and KENNEDY, A. R., 2018. International Journal of Fatigue. 114, 92-108
BUSS, T. M., ROUSE, J. P., HYDE, C. J. and GARVEY, S. D., 2018.
LEIDERMARK, D., ERIKSSON, R., ROUSE, J. P., HYDE, C. J. and STEKOVIC, S., 2018.
XU, Z., MURRAY, J. W., HYDE, C. J. and CLARE, A. T., 2018. Additive Manufacturing. 24, 486-497
ROUSE, J. P., HYDE, C. J. and MORRIS, A., 2018. International Journal of Pressure Vessels and Piping. 168, 269-288
XU, Z., HYDE, C. J., THOMPSON, A., LEACH, R. K., MASKERY, I., TUCK, C. and CLARE, A. T., 2017. Materials and Design. 133, 520-527
ROUSE J and HYDE C, 2016. Materials.
LI DF, BARRETT RA, O'DONOGHUE PE, HYDE CJ, O'DOWD NP and LEEN SB, 2016. International Journal of Fatigue.
PETKOV, M. P., HYDE, C. J. and HYDE, T. H., 2016. Journal of Strain Analysis for Engineering Design. 51(3), 179-206
DYSON, C. C., SUN, W., HYDE, C. J., BRETT, S. J. and HYDE, T. H., 2016. Materials Science and Technology (United Kingdom). 32(15), 1567-1581
DYSON, C., SUN, W., BRETT, S. J., HYDE, T. H., HYDE, C. J., SHINGLEDECKER, J. and PURDY, D., 2016.
C. J. HYDE and T. M. BUSS, 2015. Materials at High Temperatures. 20(3), 276-279
T. H. HYDE, W. SUN and C. J. HYDE, 2014. Applied Creep Mechanics McGraw-Hill Education.
HYDE, T. H., HYDE, C. J. and SUN, W., 2014. Journal of Pressure Vessel Technology, Transactions of the ASME. 136(2),
BARRETT, R. A., FARRAGHER, T. P., HYDE, C. J., O'DOWD, N. P., O'DONOGHUE, P. E. and LEEN, S. B., 2014. Journal of Pressure Vessel Technology, Transactions of the ASME. 136(2),
HYDE, C. J., SUN, W., HYDE, T. H., ROUSE, J. P., FARRAGHER, T., O'DOWD, N. P. and LEEN, S. B., 2014. Journal of Pressure Vessel Technology, Transactions of the ASME. 136(4),
FARRAGHER, T. P., SCULLY, S., O'DOWD, N. P., HYDE, C. J. and LEEN, S. B., 2014. Journal of Pressure Vessel Technology, Transactions of the ASME. 136(2),
ROUSE, J. P., HYDE, C. J., SUN, W. and HYDE, T. H., 2014. Materials Science and Technology (United Kingdom). 30(1), 54-62
C. J. HYDE, T. H. HYDE, W. SUN, S. NARDONE and E. DE. BRUYCKER, 2014. Small Ring Testing of High Temperature Materials In: 3rd European Creep Collaborative Committee.
P. E. O'DONOGHUE, R. A. BARRETT, S. REAPE, S. SCULLY, C. J. HYDE and S. B. LEEN, 2014. Thermo-mechanical fatigue in power plant steels: Enhanced numerical modelling with experimental validation In: Civil Engineering Research in Ireland.
C. J. HYDE and T. M. BUSS, 2014. Cyclic thermo-mechanical material modelling and testing of 316 stainless steel In: HTMTC/IOM3 Creep Fatigue Crack Development Symposium.
S. J. BRETT, B. KUHN, J. H. RANTALA and C. J. HYDE, 2014. Impression Creep Testing for Material Characterization in Development and Application In: 10th Conference on Materials for Advanced Power Engineering.
HYDE, T.H., HYDE, C.J. and SUN, W., 2013. Journal of Strain Analysis for Engineering Design. 48(2), 112-125
ROUSE, J. P., HYDE, C. J., SUN, W. and HYDE, T. H., 2013. MATERIALS AT HIGH TEMPERATURES. 30(2), 117-128
C. J. HYDE, T. H. HYDE, W. SUN, S. NARDONE and E. DE. BRUYCKER, 2013. Materials Science and Engineering A. 586, 358-366
J. P. ROUSE, C. J. HYDE, W. SUN and T. H. HYDE, 2013. Journal of Strain Analysis. 48(6), 347-363
T. FARRAGHER, S. SCULLY, N. P. O鈥橠OWD, C. J. HYDE and S. B. LEEN, 2013. High Temperature, Low Cycle Fatigue Characterisation of P91 Weld and Heat Affected Zone Material In: ASME 2013: Pressure Vessels and Piping Conference.
T. H. HYDE, W. SUN and C. J. HYDE, 2013. In: Advanced Materials Modelling for Structures: An overview of small specimen creep testing Springer-Verlag Berlin Heidelberg.
SAAD A.A., HYDE T.H., SUN W., HYDE C.J., TANNER D.W.J., 2013. International Journal of Pressure Vessels and Piping. 111-112, 246-252
HYDE, C.J., SUN, W., HYDE, T.H. and SAAD, A.A., 2012. Computational Materials Science. 56(April), 29-33
HYDE, C.J., SUN, W. and HYDE, T.H., 2012. Journal of Energy and Power Engineering. 6(9), 1369-1378
T. H. HYDE, C. J. HYDE and W. SUN, 2012. An Overview of Small Specimen Creep Testing In: International Union of Theoretical and Applied Mechanics Symposium.
C. J. HYDE, W. SUN, T. H. HYDE, J. P. ROUSE, T. FARRAGHER, N. P. O鈥橠OWD and S. B. LEEN, 2012. Cyclic Visco-Plasticity Testing and Modelling of a Service-Aged P91 Steel In: ASME 2012: Pressure Vessels and Piping Conference.
T. H. HYDE, C. J. HYDE and W. SUN, 2012. A Basis for Selecting the Most Appropriate Small Specimen Creep Test Type In: ASME 2012: Pressure Vessels and Piping Conference.
C. J. HYDE, W. SUN, T. H. HYDE, M. SABER and A. A. BECKER, 2012. Modelling of Creep Crack Growth in Power Plant Steels using the Liu and Murakami Damage Model In: Creep and Fatigue at Elevated Temperatures (Creep 9).
J. P. ROUSE, C. J. HYDE, W. SUN and T. H. HYDE, 2012. Effective Optimisation Procedures for Determining the Chaboche Unified Visco-Plasticity Model Material Constants from Isothermal P91 Steel Experimental Data In: Creep and Fatigue at Elevated Temperatures (Creep 9).
T. FARRAGHER, N. P. O鈥橠OWD, S. SCULLY, C. J. HYDE, W. SUN and S. B. LEEN, 2012. A Thermo-Mechanical Analysis Methodology for Power Plant Components In: Creep and Fatigue at Elevated Temperatures (Creep 9).
D.W.J. TANNER, T. H. HYDE, W. SUN, A. A. BECKER, C. J. HYDE and M. SABER, 2012. Advanced Applications of Finite Element Creep Continuum Damage Mechanics In: Creep and Fatigue at Elevated Temperatures (Creep 9).
C. J. HYDE, T. H. HYDE, W. SUN, S. NARDONE and E. DE. BRUYCKER, 2012. Small Ring Specimen Creep Testing of a Nickel-Based Superalloy In: 2nd International Conference on the Determination of Mechanical Properties of Materials by Small Punch Testing of Miniature Specimens and Other Techniques.
SAAD, A. A., HYDE, C. J., SUN, W. and HYDE, T. H., 2011. MATERIALS AT HIGH TEMPERATURES. 28(3), 212-218
C. J. HYDE, W. SUN, T. H. HYDE and Y. P GONG, 2011. Characterisation of a P91 Steel using a Unified Visco-Plasticity Model In: Plasticity 2011 conference.
W. SUN, C. J. HYDE, T. H. HYDE, A. A. BECKER, R. LI and M. SABER, 2011. Finite Element Analysis of Creep Crack Growth at High Temperature In: International Congress on advances in Nuclear Power Plants. 2418-2424
A. A. SAAD, T. H. HYDE, W. SUN and C. J. HYDE, 2011. Constitutive Model Development of P91 Steel and its Simulation in TMF Conditions In: International Conference on Engineering Structural Integrity Assessment.
HYDE, C. J., SUN, W. and HYDE, T. H., 2011. In: International conference on the mechanical behaviour of materials.
HYDE, C. J., SUN, W. and HYDE, T. H., 2011. A NOVEL METHOD FOR OBTAINING THE MULTIAXIALITY CONSTANT FOR DAMAGE MECHANICS WHICH IS APPROPRIATE TO CRACK TIP CONDITIONS In: ASME 2011 Pressure Vessels & Piping Division Conference. 129-138
C. J. HYDE, W. SUN, T. H. HYDE and A. A. SAAD, 2011. Thermo-Mechanical Fatigue Testing and Simulation using a Visco-Plasticity Model In: International Workshop on Computational Mechanics of Materials.
D. W. J. TANNER, C. J. HYDE, M. SABER, W. SUN, A. A. BECKER and T. H. HYDE, 2011. Creep Continuum Damage Analysis with Abaqus In: SIMULIA UK Regional User Meeting. 96-109
C. J. HYDE, W. SUN and T. H. HYDE, 2011. Procedia Engineering. 10, 1157-1162
A. A. SAAD, T. H. HYDE, W. SUN and C. J. HYDE, 2011. Characterisation of Visco-Plasticity Behaviour of P91 and P92 Power Plant Steels In: International conference on the mechanical behaviour of materials.
GONG, Y.P., HYDE, C.J., SUN, W. and HYDE, T.H., 2010. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 224(1), 19-29
HYDE, C.J., HYDE, T.H., SUN, W. and BECKER, A.A., 2010. Engineering Fracture Mechanics. 77(12), 2385-2402
HYDE, T.H., STOYANOV, M., SUN, W. and HYDE, C.J., 2010. Journal of Strain Analysis for Engineering Design. 45(3), 141-164
C. J. HYDE, W. SUN and S. B. LEEN, 2010. International Journal of Pressure Vessels and Piping. 87(6), 365-372
A. A. SAAD, C. J. HYDE, W. SUN and T. H. HYDE, 2010. Thermal-Mechanical Fatigue Simulation of a P91 Steel in a Temperature Range of 400-600掳C In: HIDA-5.
HYDE, C. J., SUN, W., HYDE, T. H. and BECKER, A. A., 2010. THE EFFECT OF A STARTER NOTCH ON THE ISOTHERMAL AND THERMOMECHANICAL FATIGUE LIFE OF A NICKEL-BASED SUPERALLOY In: ASME Pressure Vessels & Piping Division / K-PVP Conference. 347-356
C. J. HYDE, W. SUN and T. H. HYDE, 2010. Identification of Material Properties for a Unified Visco-Plasticity Model and Application to Isothermal and An-Isothermal Experimental Data In: 4th International Conference on Advances and Trends in Structural Engineering, Mechanics and Computation. 64
HYDE, C. J., SUN, W. and LEEN, S. B., 2009. Cyclic Thermo-mechanical Material Modelling and Testing of 316 Stainless Steel In: 2nd European Creep Collaborative Committee. 488-501
Y. P. GONG, C. J. HYDE, W. SUN and T. H. HYDE, 2009. Applied Mechanics & Materials. 16-19, 955-959
Y. P. GONG, C. J. HYDE, W. SUN and T. H. HYDE, 2009. Determination of material parameters in the Chaboche unified viscoplasticty model In: 7th Int. Conf. on e-Engineering & Digital Enterprise Technology.