FANG, Y., DONG, X., MOHAMMAD, A. and AXINTE, D., 2023. IEEE/ASME Transactions on Mechatronics. 1-12
BARRIENTOS-DIEZ, J., RUSSO, M., DONG, X., AXINTE, D. and KELL, J., 2023. IEEE Robotics and Automation Letters. 1-8
YANG, Y., BILLINGHAM, J., AXINTE, D. and LIAO, Z., 2023. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 479(2270),
ZAN, S. S., LIAO, Z. R., ROBLES-LINARES, J. A., LUNA, G. G. and AXINTE, D., 2023. Machining of long ceramic fibre reinforced metal matrix composites - How could temperature influence the cutting mechanisms?: International Journal of Machine Tools & Manufacture International Journal of Machine Tools & Manufacture. 185, BOGATYREV, A., LIAO, Z., AXINTE, D. and NORTON, A., 2023. Journal of the European Ceramic Society. 43(8), 3704-3726
SANCHEZ, I., AXINTE, D., LIAO, Z., GAVALDA-DIAZ, O. and SMITH, R., 2023. Materials and Design. 229,
ZAN, S., LIU, G., LIAO, Z., AXINTE, D. and FANG, F., 2023. CIRP Annals.
PICAVEA, J., MOHAMMAD, A., GAMEROS, A., YANG, J. and AXINTE, D., 2023. CIRP Annals.
ZHANG, B., LU, S., RABIEY, M., AXINTE, D. and BLEICHER, F., 2023. CIRP Annals.
LI, L., CHEN, H., LIAO, Z., YANG, Y. and AXINTE, D., 2023. International Journal of Machine Tools and Manufacture. 190,
ZAN, S. S., LIU, G. Y., LIAO, Z. R., AXINTE, D. and FANG, F. Z., 2023. Inverse size effect and deformation mechanism in Ti-6Al-4V cutting process- investigation on effect of bimodal microstructure on machining: Cirp Annals-Manufacturing Technology Cirp Annals-Manufacturing Technology. 72(1), 41-44 HAN, X., LIAO, Z., LUNA, G. G., LI, H. N. and AXINTE, D., 2022. Journal of Manufacturing Processes. 73, 518-530
DONG, X., WANG, M., MOHAMMAD, A., BA, W., RUSSO, M., NORTON, A., KELL, J. and AXINTE, D., 2022. IEEE/ASME Transactions on Mechatronics.
LI, J., LI, H. N., LIAO, Z. and AXINTE, D., 2022. Journal of Materials Processing Technology. 304,
PICAVEA, J., GAMEROS, A., YANG, J. and AXINTE, D., 2022. International Journal of Mechanical Sciences. 222,
BISHOP, C., RUSSO, M., DONG, X. and AXINTE, D., 2022. Robotica. 27(6), 5339 - 5350
SUN, E., AXINTE, D., ALATORRE, D. and DONG, X., 2022. IEEE Transactions on Industrial Electronics.
LA MONACA, A., LIAO, Z., AXINTE, D. A., M'SAOUBI, R. and HARDY, M. C., 2022. CIRP Annals.
GARC脥A LUNA, G., AXINTE, D. and NOVOVIC, D., 2022. CIRP Annals.
ROBLES-LINARES, J. A., LIAO, Z., AXINTE, D. and GAMEROS, A., 2022. Journal of Materials Processing Technology. 307,
CAMACHO-ARREGUIN, J. I., WANG, M., RUSSO, M., DONG, X. and AXINTE, D., 2022. IEEE/ASME Transactions on Mechatronics. 1-12
LA MONACA, A., AXINTE, D. A., LIAO, Z. R., M'SAOUBI, R. and HARDY, M. C., 2022. Temperature-dependent shear localisation and microstructural evolution in machining of nickel-base superalloys: Materials & Design Materials & Design. 219, ABBA, E., SPEIDEL, A., LIAO, Z. R., AXINTE, D. and NOVOVIC, D., 2022. A bar of cutting fluid: Deep Eutectic Fluids with a novel flavour: Materials Today Advances Materials Today Advances. 16, AXINTE, D. A., 2022. International Journal of Machine Tools and Manufacture. 182,
AXINTE, D. A., 2022. International Journal of Machine Tools and Manufacture. 182,
ATIA, M. G. B., MOHAMMAD, A., GAMEROS, A., AXINTE, D. and WRIGHT, I., 2022. Advanced Science.
WEI, W., ROBLES-LINARES, J. A., LIAO, Z., WANG, Z., LUNA, G. G., BILLINGHAM, J. and AXINTE, D., 2022. Journal of Manufacturing Processes. 84, 43-54
AXINTE, D., HUANG, H., YAN, J. and LIAO, Z., 2022. International Journal of Machine Tools and Manufacture. 183,
SRIRATANASAK, N., AXINTE, D., DONG, X., MOHAMMAD, A., RUSSO, M. and RAIMONDI, L., 2022. Advanced Intelligent Systems. 4(12),
TRONCOSO, D. A., ROBLES-LINARES, J. A., RUSSO, M., ELBANNA, M. A., WILD, S., DONG, X., MOHAMMAD, A., KELL, J., NORTON, A. D. and AXINTE, D., 2022. IEEE Robotics and Automation Magazine. 2-13
WANG, M., DONG, X., BA, W., MOHAMMAD, A., AXINTE, D. and NORTON, A., 2021. Robotics and Computer-Integrated Manufacturing. 67,
BARRIENTOS-DIEZ, J., DONG, X., AXINTE, D. and KELL, J., 2021. Real-Time Kinematics of Continuum Robots: Modelling and Validation: Robotics and Computer-Integrated Manufacturing Robotics and Computer-Integrated Manufacturing. 67, 12 ROBLES-LINARES, J. A., AXINTE, D., LIAO, Z. and GAMEROS, A., 2021. Materials and Design. 197,
HAN, X., XU, D. D., AXINTE, D., LIAO, Z. R. and LI, H. N., 2021. On understanding the specific cutting mechanisms governing the workpiece surface integrity in metal matrix composites machining: Journal of Materials Processing Technology Journal of Materials Processing Technology. 288, 15 LI, J., LI, H. N., LIAO, Z. and AXINTE, D., 2021. Journal of Materials Processing Technology. 290,
RUSSO, M., RAIMONDI, L., DONG, X., AXINTE, D. and KELL, J., 2021. Robotics and Computer-Integrated Manufacturing. 69,
ZHIRONG LIAO, ANDREA LA MONACA, JAMES MURRAY, ALISTAIR SPEIDEL, DMITRII USHMAEV, ADAM CLARE, DRAGOS AXINTE and RACHID M'SAOUBI, 2021. International Journal of Machine Tools and Manufacture. 103687
LACHOWICZ, D. S., BENNETT, C., AXINTE, D. A., LOWTH, S., WALPOLE, A. and HANNON, C., 2021. International Journal of Machine Tools and Manufacture. 161,
BA, W., DONG, X., MOHAMMAD, A., WANG, M., AXINTE, D. and NORTON, A., 2021. IEEE/ASME Transactions on Mechatronics.
RAIMONDI, L., BENNETT, C. J., AXINTE, D., GAMEROS, A. and STEVENS, P. A., 2021. Mechanical Systems and Signal Processing. 156,
CHA, D. and AXINTE, D., 2021. International Journal of Heat and Mass Transfer. 173,
LIAO, Z., XU, D., AXINTE, D., DIBOINE, J. and WRETLAND, A., 2021. CIRP Annals.
RUSSO, M., BARRIENTOS-DIEZ, J. and AXINTE, D., 2021. IEEE/ASME Transactions on Mechatronics.
XU, D., EDWARDS, T. E. J., LIAO, Z., MAEDER, X., RAMACHANDRAMOORTHY, R., JAIN, M., MICHLER, J. and AXINTE, D., 2021. Acta Materialia. 212,
MONACA, A. L., MURRAY, J. W., LIAO, Z. R., SPEIDEL, A., ROBLES-LINARES, J. A., AXINTE, D. A., HARDY, M. C. and CLARE, A. T., 2021. Surface integrity in metal machining-Part II: Functional performance: International Journal of Machine Tools & Manufacture International Journal of Machine Tools & Manufacture. 164, 55 ANDREA LA MONACA, DRAGOS A. AXINTE, ZHIRONG LIAO, RACHID M'SAOUBI and MARK C. HARDY, 2021. International Journal of Machine Tools and Manufacture. 103765
RAIMONDI, L., BENNETT, C. J., GAMEROS, A. and AXINTE, D., 2021. Mechanical Systems and Signal Processing. 161,
BIANCHI, M. F., GAMEROS, A. A., AXINTE, D. A., LOWTH, S., CENDROWICZ, A. M. and WELCH, S. T., 2021. Journal of Manufacturing Processes. 68, 1767-1783
KRAJNIK, P., HASHIMOTO, F., KARPUSCHEWSKI, B., DA SILVA, E. J. and AXINTE, D., 2021. CIRP Annals.
MOHAMMAD, A., RUSSO, M., FANG, Y., DONG, X., AXINTE, D. and KELL, J., 2021. IEEE Robotics and Automation Letters.
ALATORRE, D., AXINTE, D. and RABANI, A., 2021. IEEE Transactions on Robotics.
GAMEROS, A., DIAZ, O. G., AXINTE, D. and NOVOVIC, D., 2021. Composite Structures. 274,
LIAO, Z., XU, D., LUNA, G. G., AXINTE, D., AUGUSTINAVICIUS, G., SARASUA, J. A. and WRETLAND, A., 2021. Journal of Materials Processing Technology. 298,
WINTER, K., LIAO, Z., RAMANATHAN, R., AXINTE, D., VAKIL, G. and GERADA, C., 2021. Materials and Design. 210,
WANG, Z., LIAO, Z., AXINTE, D., DONG, X., XU, D. and AUGUSTINAVICIUS, G., 2021. Materials and Design. 212,
RUSSO, M., SRIRATANASAK, N., BA, W., DONG, X., MOHAMMAD, A. and AXINTE, D., 2021. Ieee Robotics and Automation Letters.
ALATORRE, D., RABANI, A., AXINTE, D. and BRANSON, D. T., 2020. Mechanical Systems and Signal Processing. 136,
CRAIG, O., PICAVEA, J., GAMEROS, A., AXINTE, D. and LOWTH, S., 2020. Journal of Manufacturing Processes. 50, 638-652
XU, D., LIAO, Z., AXINTE, D. and HARDY, M., 2020. International Journal of Machine Tools and Manufacture. 151,
DING, L., AXINTE, D., BUTLER-SMITH, P. and ABDELHAFEEZ HASSAN, A., 2020. Wear. 448-449,
YANG, Y., LI, H., LIAO, Z., AXINTE, D., ZHU, W. and BEAUCAMP, A., 2020. International Journal of Machine Tools and Manufacture. 152,
LA MONACA, A., LIAO, Z. and AXINTE, D., 2020. Journal of Materials Processing Technology. 282,
SANCHEZ, I., AXINTE, D. and SMITH, R., 2020. CIRP Annals.
XU, D., LIAO, Z., AXINTE, D., SARASUA, J. A., M'SAOUBI, R. and WRETLAND, A., 2020. Materials and Design. 194,
LIAO, Z., SANCHEZ, I., XU, D., AXINTE, D., AUGUSTINAVICIUS, G. and WRETLAND, A., 2020. Journal of Materials Processing Technology. 285,
MA, N., DONG, X. and AXINTE, D., 2020. IEEE/ASME Transactions on Mechatronics. 25(3), 1409-1421
CAMACHO-ARREGUIN, J., WANG, M., DONG, X. and AXINTE, D., 2020. Mechanism and Machine Theory. 153,
LIAO, Z. R., SANCHEZ, I., XU, D. D., AXINTE, D., AUGUSTINAVICIUS, G. and WRETLAND, A., 2020. Dual-processing by abrasive waterjet machining-A method for machining and surface modification of nickel-based superalloy: Journal of Materials Processing Technology Journal of Materials Processing Technology. 285, 14 LIAO, Z., XU, D., AXINTE, D., M'SAOUBI, R., THELIN, J. and WRETLAND, A., 2020. CIRP Annals. 69(1), 65-68
LIU, Q., LIAO, Z. and AXINTE, D., 2020. International Journal of Machine Tools and Manufacture.
BACHAROUDIS, K. C., BAINBRIDGE, D., TURNER, A., POPOV, A. A. and RATCHEV, S. M., 2020. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
PALMER, D. and AXINTE, D., 2019. Robotics and Computer-Integrated Manufacturing. 56, 107-116
GAVALDA DIAZ, O., AXINTE, D. A., BUTLER-SMITH, P. and NOVOVIC, D., 2019. Materials Science and Engineering A. 743, 1-11
SHANG, Z., LIAO, Z., SARASUA, J. A., BILLINGHAM, J. and AXINTE, D., 2019. International Journal of Machine Tools and Manufacture. 138, 36-50
DONG, X., PALMER, D., AXINTE, D. and KELL, J., 2019. Journal of Manufacturing Processes. 38, 313-318
GAVALDA DIAZ, O., GARCIA LUNA, G., LIAO, Z. and AXINTE, D., 2019. International Journal of Machine Tools and Manufacture. 139, 24-36
AXINTE, D. and BILLINGHAM, J., 2019. Proceedings of the National Academy of Sciences of the United States of America. 116(12), 5341-5343
BIANCHI, M. F., GAMEROS, A. A., AXINTE, D. A., LOWTH, S., CENDROWICZ, A. M. and WELCH, S. T., 2019. Journal of the European Ceramic Society.
XU, D., LIAO, Z., AXINTE, D., HARDY, M. and M'SAOUBI, R., 2019. CIRP Annals.
SPAMPINATO, A., AXINTE, D., NOVIC, D. and BUTLER-SMITH, P., 2019. CIRP Annals.
CHA, D., AXINTE, D. and BILLINGHAM, J., 2019. International Journal of Machine Tools and Manufacture. 141, 78-88
ZHU, W. L., YANG, Y., LI, H. N., AXINTE, D. and BEAUCAMP, A., 2019. International Journal of Machine Tools and Manufacture. 142, 76-97
AXINTE, D., GUO, Y., LIAO, Z., SHIH, A. J., M'SAOUBI, R. and SUGITA, N., 2019. CIRP Annals.
LIAO, Z., ABDELHAFEEZ, A., LI, H., YANG, Y., DIAZ, O. G. and AXINTE, D., 2019. International Journal of Machine Tools and Manufacture. 143, 63-91
AURICH, J. C., KIRSCH, B., SETTI, D., AXINTE, D., BEAUCAMP, A., BUTLER-SMITH, P. and YAMAGUCHI, H., 2019. CIRP Annals.
MEI, J., DIAZ, O. G. and AXINTE, D. A., 2019. Composite Structures. 226,
AXINTE, D., 2019. International Journal of Machine Tools and Manufacture. 145,
LIAO, Z., POLYAKOV, M., DIAZ, O. G., AXINTE, D., MOHANTY, G., MAEDER, X., MICHLER, J. and HARDY, M., 2019. Acta Materialia. 180, 2-14
MA, N., DONG, X., PALMER, D., ARREGUIN, J. C., LIAO, Z., WANG, M. and AXINTE, D., 2019. Journal of Manufacturing Processes. 47, 192-201
YANG, Y., LI, H., LIAO, Z. and AXINTE, D., 2019. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 475(2230),
CADOT, G. B. J., THOMAS, K., BEST, J. P., TAYLOR, A. A., MICHLER, J., AXINTE, D. A. and BILLINGHAM, J., 2018. Carbon. 127, 349-365
AXINTE, D., DONG, X., PALMER, D., RUSHWORTH, A., OLARRA, A., ARIZAGA, I., GOMEZ-ACEDO, E., TXOPERENA, K., PFEIFFER, K. and MESSMER, F., 2018. IEEE/ASME Transactions on Mechatronics.
FANICCHIA, F. and AXINTE, D. A., 2018. International Journal of Heat and Mass Transfer. 122, 1327-1342
LUO, M., LUO, H., AXINTE, D., LIU, D., MEI, J. and LIAO, Z., 2018. Mechanical Systems and Signal Processing. 110, 556-568
LIAO, Z., AXINTE, D., MIESZALA, M., M'SAOUBI, R., ABELHAFEEZ, A., MICHLER, J. and HARDY, M., 2018. CIRP Annals.
AXINTE, D., 2018. International Journal of Machine Tools and Manufacture. 132, 1-2
LI, H. N. and AXINTE, D., 2018. International Journal of Machine Tools and Manufacture. 132, 50-63
LIN, J. and AXINTE, D., 2018. International Journal of Machine Tools and Manufacture. 133, 1-3
DIAZ, O. G., AXINTE, D. A. and NOVOVIC, D., 2018. Composites Part B: Engineering. 148, 217-226
FANICCHIA, F., MAEDER, X., AST, J., TAYLOR, A. A., GUO, Y., POLYAKOV, M. N., MICHLER, J. and AXINTE, D. A., 2018. Materials and Design. 153, 36-46
MA, N., YU, J., DONG, X. and AXINTE, D., 2018. Mechanism and Machine Theory. 129, 202-217
ALATORRE TRONCOSO, D., NASSER, B., RABANI, A., NAGY, A., DONG, X., AXINTE, D. and KELL, J., 2018. IEEE Robotics and Automation Magazine.
ALATORRE, D., NASSER, B., RABANI, A., NAGY-SOCHACKI, A., DONG, X., AXINTE, D. and KELL, J., 2018.
WANG, M., PALMER, D., DONG, X., ALATORRE, D., AXINTE, D. and NORTON, A., 2018. In: 5648-5653
DONG, X., AXINTE, D., PALMER, D., COBOS, S., RAFFLES, M., RABANI, A. and KELL, J., 2017. Robotics and Computer-Integrated Manufacturing. 44, 218-229
STOESSLEIN, M., AXINTE, D. and GILBERT, D., 2017. Journal of Manufacturing Science and Engineering, Transactions of the ASME. 139(3),
LIAO, Z., AXINTE, D. A. and GAO, D., 2017. International Journal of Machine Tools and Manufacture. 116, 52-59
LI, H. N. and AXINTE, D., 2017. International Journal of Machine Tools and Manufacture. 116, 60-76
FANICCHIA, F., AXINTE, D. A., KELL, J., MCINTYRE, R., BREWSTER, G. and NORTON, A. D., 2017. Surface and Coatings Technology. 315, 546-557
BEAUCAMP, A. T. and AXINTE, D., 2017. International Journal of Machine Tools and Manufacture. 115, 1
GAMEROS, A. A., AXINTE, D., SILLER, H. R., LOWTH, S. and WINTON, P., 2017. Experimental and Numerical 糖心原创 of a Fixturing System for Complex Geometry and Low Stiffness Components: Journal of Manufacturing Science and Engineering-Transactions of the Asme Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139(4), 12 ZHOU, Y. C., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2017. Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel (February, pg 89, 2016): Wear Wear. 372, 216-217 GAVALDA DIAZ, O. and AXINTE, D. A., 2017. International Journal of Machine Tools and Manufacture. 118-119, 12-25
ADDEPALLI, S., ROY, R., AXINTE, D. and MEHNEN, J., 2017. 'In-situ' inspection technologies: Trends in degradation assessment and associated technologies. In: ROY, R., TOMIYAMA, T., TIWARI, A., TRACHT, K., SHEHAB, E., MEHNEN, J., ERKOYUNCU, J. A. and TAPOGLOU, N., eds., Proceedings of the 5th International Conference in through-Life Engineering Services 59. Elsevier Science Bv. 35-40 OLARRA, A., AXINTE, D., URIARTE, L. and BUENO, R., 2017. CIRP Annals - Manufacturing Technology.
SPAMPINATO, A., AXINTE, D., BUTLER-SMITH, P. and NOVOVIC, D., 2017. CIRP Annals - Manufacturing Technology.
MIESZALA, M., TORRUBIA, P. L., AXINTE, D. A., SCHWIEDRZIK, J. J., GUO, Y., MISCHLER, S., MICHLER, J. and PHILIPPE, L., 2017. Journal of Materials Processing Technology. 247, 92-102
MEI, J., GAVALDA DIAZ, O. and AXINTE, D. A., 2017. Composites Part B: Engineering. 125, 27-38
CADOT, G. B. J., BILLINGHAM, J. and AXINTE, D. A., 2017. Journal of Physics D: Applied Physics. 50(24),
ZHOU, Y. C., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2017. Effects of novel rotary-abrasive finishing pad textures on the controlled 2-body abrasive wear of Type 304 stainless steel (vol 348, pg 89, 2016): Wear Wear. 386-387, 247-249 GAMEROS, A., LOWTH, S., AXINTE, D., NAGY-SOCHACKI, A., CRAIG, O. and SILLER, H. R., 2017. 123, 1-21
A. BILBAO-GUILLERNA, R.T. EACHAMBADI, G.B.J. CADOT, D.A. AXINTE, J. BILLINGHAM, F. STUMPF, S. BEUER and M. ROMMEL, 2017. Journal of Materials Processing Technology.
DRAGOS AXINTE, JOHN BILLINGHAM and BILBAO GUILLERNA, 2017. SCIENCE ADVANCES. 3(9), 1 to 7
SPAMPINATO, A. and AXINTE, D. A., 2017. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 473(2208),
LIAO, Z. and AXINTE, D. A., 2016. Journal of Materials Processing Technology. 229, 82-93
ZHOU, Y., AXINTE, D., BUTLER-SMITH, P., JESSEN, E. and NORBYGAARD, T., 2016. Wear. 348-349, 89-97
LIAO, Z. and AXINTE, D. A., 2016. International Journal of Machine Tools and Manufacture. 102, 41-55
RABANI A., MADARIAGA J., BOUVIER C. and AXINTE D., 2016. Journal of Manufacturing Processes. 22, 99鈥�107
TORRUBIA, P. L., BILLINGHAM, J. and AXINTE, D. A., 2016. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 472(2186),
CADOT, G. B. J., AXINTE, D. A. and BILLINGHAM, J., 2016. International Journal of Machine Tools and Manufacture. 107, 8-20
BUTLER-SMITH, P., WARHANEK, M., AXINTE, D., FAY, M., BUCOURT, J. F., RAGUENEAU, R. and WEGENER, K., 2016. CIRP Annals - Manufacturing Technology.
DONG, X., RAFFLES, M., COBOS-GUZMAN, S., AXINTE, D. and KELL, J., 2016. A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation: Journal of Mechanisms and Robotics-Transactions of the Asme 8(2), STOESSLEIN, M., AXINTE, D. A. and BILBAO GUILLERNA, A., 2016. Mechatronics. 38, 54-67
LI, H. N. and AXINTE, D., 2016. International Journal of Machine Tools and Manufacture. 109, 8-35
RUSHWORTH, A., AXINTE, D., RAFFLES, M. and COBOS-GUZMAN, S., 2016. Mechatronics. 40, 63-77
M PACELLA, D AXINTE, P BUTLER-SMITH, P SHIPWAY, M DAINE and C WORT, 2015. Journal of Manufacturing Science and Engineering. 138(2)
LOWTH S and D AXINTE, 2015. An investigation into the influence of inter-component assembly gaps upon the geometry of tack welded annular structures Annals of CIRP. 1, (In Press.)
F KLOCKE, L SOO, B KARPUSCHEWSKI, J WEBSTER and D NOVOVIC, 2015. Abrasive machining of advanced aerospace alloys and composites Annals of CIRP. 2, (In Press.)
R M鈥橲AOUBI R, D AXINTE, L SOO, C NOBEL and H ATTIA, 2015. High performance cutting of advanced aerospace alloys and composite materials Annals of CIRP. 2, (In Press.)
RUSHWORTH, A., COBOS-GUZMAN, S., AXINTE, D. and RAFFLES, M., 2015. Robotics and Autonomous Systems.
LOWTH, S., AXINTE, D. A. and SUN, W., 2015. CIRP Annals - Manufacturing Technology.
LOZANO TORRUBIA, P., AXINTE, D. A. and BILLINGHAM, J., 2015. International Journal of Machine Tools and Manufacture. 95, 39-51
PACELLA, M., BUTLER-SMITH, P. W., AXINTE, D. A. and FAY, M. W., 2015. Diamond and Related Materials. 59, 62-68
BILBAO GUILLERNA, A., AXINTE, D. and BILLINGHAM, J., 2015. International Journal of Machine Tools and Manufacture. 99, 34-42
COBOS-GUZMAN, S., PALMER, D. and AXINTE, D., 2015. Robotica. 1-17
DONG, X., RAFFLES, M., COBOS-GUZMAN, S., AXINTE, D. and KELL, J., 2015. Journal of Mechanisms and Robotics. 8(2),
TURNER S.L., RABANI A., AXINTE D.A., KING C.W., 2014. Ultrasonics. 54(3), 749鈥�753
PACELLA M., BUTLER-SMITH P.W., AXINTE D.A., FAY M.W., 2014. Journal of Materials Processing Technology. 214(5), 1153鈥�1161
LOWTH S., AXINTE D.A., 2014. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY. 38(2), 379-390
DONG, X, RAFFLES, M, GUZMAN, SC, AXINTE, D, KELL, J, 2014. MECHANISM AND MACHINE THEORY. 77, 73-91
D. SRINIVASU and D. A. AXINTE, 2014. Mask-less pocket milling of composites by abrasive waterjets 鈥� An experimental investigaton ASME - Journal of Manufacturing Science and Engineering. 136/4,, 1144-1157
P. BUTLER-SMITH, D. A. AXINTE, M.DAINE and C.KONG, 2014. Mechanisms of surface response to overlapped abrasive grits of controlled shapes and positions: An analysis of ductile and brittle materials Annals of CIRP. 63, in press (In Press.)
R. M鈥橲AOUBI, D. A. AXINTE, C. HERBERT, M. HARDY and P. SALMON, 2014. Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling Annals of CIRP. in press (In Press.)
C. HERBERT, D. A. AXINTE, M. HARDY and P. WITHERS, 2014. Influence of surface anomalies following hole making operations on the fatigue performance for a Nickel-based superalloy ASME - Journal of Manufacturing Science and Engineering. in press (In Press.)
PACELLA, M. , AXINTE, D.A., BUTLER-SMITH, P.W., DAINE, M., 2014. Procedia CIRP. 13, 387-392
AXINTE, D.A, KARPUSCHEWSKI, B, KONG, M.C, BEAUCAMP, A.T, ANWAR, S, MILLER, D, PETZEL, M, 2014. CIRP Annals - Manufacturing Technology.
OLARRA, A, ALLEN, J.M, AXINTE, D.A, 2014. Precision Engineering. 38(3), 589-604
SRINIVASU, D.S. , AXINTE, D.A., 2014. Journal of Manufacturing Science and Engineering, Transactions of the ASME. 136(4), 041005
HARDY, M.C, HERBERT, C.R.J, KWONG, J, LI, W, AXINTE, D.A, SHARMAN, A.R.C, ENCINAS-OROPESA, A, WITHERS, P.J, 2014. In: 2nd CIRP Conference on Surface Integrity,. 13. 411-416
SRINIVASU, D.S, AXINTE, D.A, 2014. In: 2nd CIRP Conference on Surface Integrity. 13. 371-376
KOLLURU, KV ; AXINTE, DA ; RAFFLES, MH ; BECKER, AA, 2014. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 228(6), 826-836
D. PALMER, S. COBOS GUZMAN and D. AXINTE, 2014. Robotics and Autonomous Systems. 62, 1478-1485
M'SAOUBI, R ; AXINTE, D ; HERBERT, C ; HARDY, M ; SALMON, P, 2014. CIRP ANNALS-MANUFACTURING TECHNOLOGY. 63(1), 61-64
BUTLER-SMITH, P ; AXINTE, D ; DAINE, M ; KONG, MC, 2014. CIRP ANNALS-MANUFACTURING TECHNOLOGY. 63(1), 321-324
BUTLER-SMITH PW, AXINTE DA, DAINE M, KENNEDY AR, HARPER LT, BUCOURT JF, RAGUENEAU R, 2014. International Journal of Machine Tools and Manufacture.
GILBERT, D., STOESSLEIN, M., AXINTE, D., BUTLER-SMITH, P. and KELL, J., 2014. Journal of Materials Processing Technology. 214(12), 3077-3088
BUTLER-SMITH P.W. and AXINTE D., 2013. Micro/nanometric investigations of the effects of laser ablation in the generation of micro-tools from solid CVD diamond structures Journal of Materials Processing Technology. 2, 194-200.
ANWAR, S., AXINTE, D.A. and BECKER, A.A., 2013. Journal of Materials Processing Technology. 213(2), 180-193
RAFFLES M.H., KOLLORU K. and AXINTE D., 2013. Assessment of adhesive fixture system under static and dynamic loading conditions, Journal of Engineering Manufacture Journal of Engineering Manufacture. 227(2), 267-280
MIRON C., BILLINGHAM J., AXINTE D. and KONG M.C., 2013. International Journal of Machine Tools and Manufacture. 68, 30-39
KOLLURU K., AXINTE D. and BECKER A., 2013. A solution for minimising vibrations in milling of thin walled casings using workpiece surface damping Annals of CIRP. 1(62), 415-418
KONG M.C., SRINIVASU S., AXINTE D., VOICE W., MCGOURLAY J. and HON B., 2013. On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys Annals of CIRP. 1(62), 555-558
URIARTE L., ZATARAIN M., AXINTE D., YAGU虉E-颅鈥怓ABRA J., ILHENFELDT S. and EGUIA J., 2013. Machine tools聽for large parts Annals of CIRP. 2, (In Press.)
ANWAR, S., AXINTE, D. A. and BECKER, A. A., 2013. WEAR. 303(1-2), 426-436
2013. Journal of Engineering Manufacture.
K. KOLLURU and D. A. AXINTE, 2013. Coupled interaction of dynamic responses of tool and workpiece in thin wall milling Journal of Materials Processing Technology. 213(9), 1565-1574
K. KOLLURU, D. A. AXINTE and M. RAFFLES, 2013. Vibration suppression and coupled interaction study in milling of thin wall casings in presence of tuned mass dampers Proc. of IMechE - Part B, Journal of Engineering Manufacture. in press (In Press.)
D. A. AXINTE, P. BUTLER-SMITH, C. AKGUN and K. KOLLURU, 2013. On the influence of single grit micro-geometry on grinding behavior of ductile and brittle materials International Journal of Machine Tools and Manufacture. 74, 12-18
HERBERT C, AXINTE D, BROWN P and HARDY M., 2012. Machining Science and Technology. 16(1), 40-52
ALLEN J., AXINTE D and PRINGLE T, 2012. Theoretical analysis of a special purpose miniature machine tool with parallel kinematics architecture: Free leg hexapod Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 226(3), 412-430
KONG, M.C., ANWAR, S., BILLINGHAM, J. and AXINTE, D.A., 2012. International Journal of Machine Tools and Manufacture. 53(1), 58-68
C. KONG, D. AXINTE, B. WILSON, I. MARINESCU, M. RAFFLES and J. ALLEN, 2012. An innovative design of a multi-task dynamometer for turning operations Proc. of IMechE - Part B, Journal of Engineering Manufacture. 226(5),
C. HERBERT, J. KWONG, C. KONG, D. AXINTE, M. HARDY and P. WITHERS, 2012. An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy Journal of Materials Processing Technology. 212(8), 1723鈥�1730
BUTLER-SMITH, P.W., AXINTE, D.A. and DAINE, M., 2012. International Journal of Machine Tools and Manufacture. 59(August), 55-64
KONG, M.C., MIRON, C.B., AXINTE, D.A., DAVIES, S. and KELL, J., 2012. CIRP Annals: Manufacturing Technology. 61(1), 203-206
RABANI R. and MARINESCU I., 2012. Acoustic emission energy transfer rate: a method for monitoring abrasive waterjet milling International Journal of Machine Tools and Manufacture. 61, 80-89
SRINIVASU, D. and AXINTE, D., 2011. An analytical model for top width of jet footprint in abrasive waterjet milling: a case study on SiC ceramics Journal of Engineering Manufacture. 225(3), 319-335
KONG, M.C., AXINTE, D. and VOICE, W., 2011. Journal of Materials Processing Technology. 211(6), 959-971
MARINESCU, I, AXINTE, D., WITHERS, P., HERBERT, C. and MCGOURLAY, J., 2011. An assessment of thread cutting strategies to enable damage-tolerant surfaces on an advanced Ni-based aerospace superalloy Journal of Engineering Manufacture. 225(1), 12-24
BUTLER-SMITH P.W., AXINTE D. and DAINE M., 2011. International Journal of Machine Tools and Manufacture. 51(1), 54-66
AXINTE, D.A., ALLEN, J.M., ANDERSON, R., DANE, I., URIARTE, L. and OLARA, A., 2011. CIRP Annals - Manufacturing Technology. 60(1), 395-398
ANWAR A., AXINTE D. and BECKER A., 2011. Proc. IMechE - Part J, Journal of Engineering Tribology. 225, 821-832
MARINESCU, I. and AXINTE, D., 2011. International Journal of Machine Tools and Manufacture. 51(4), 349-357
KONG C., AXINTE D. and VOICE W., 2011. International Journal of Machine Tools and Manufacture. 51(7-8), 642-648
KONG, M.C., AXINTE, D. and VOICE, W., 2010. Journal of Materials Processing Technology. 210(3), 573-584
BUTLER-SMITH P.W., AXINTE D. and LIMVACHIRAKOM, V., 2010. Journal of Engineering Manufacture. 224/8, 1305-1312
AXINTE, D., ABDUL SHUKOR, S. and BOZDANA A.T., 2010. International Journal of Machine Tools and Manufacture. 50(2), 191-203
SRINIVASU, D. and AXINTE, D., 2010. Investigations on Jet Footprint Geometry and its Characteristics for Complex Shape Machining With Abrasive Waterjets. In: , ed., Silicon Carbide Ceramic Material, Properties and Applications of Silicon Carbide
ALLEN, J., AXINTE, D., ROBERTS, P. and ANDERSON, R., 2010. International Journal of Advanced Manufacturing Technology. 50(9-12), 843-857
AXINTE, D.A and DEWES, R.C, 2010. High speed milling of AISI H13 hot work tool steel using polycrystalline cubic boron nitride ball nose mills: from experimental investigations and empirical modelling to functional testing of the machined surfaces Proceedings of IMechE - Part B, Journal of Engineering Manufacture. 224(1), 15-24
AXINTE, D. A., SRINIVASU, D. S., BILLINGHAM, J. and COOPER, M, 2010. Annals of CIRP. 59(1), 341-346
AXINTE D.A, STEPANIAN J.P, KONG M.C and MCGOURLAY J., 2009. International Journal of Machine Tools and Manufacture. 49(3-4), 351-356
AXINTE, D., KWONG, J. and KONG M.C., 2009. Journal of Materials Processing Technology. 209(4), 1843-1852
AXINTE D.A., SRINIVASU D.S., KONG M.C. and BUTLER-SMITH P.W., 2009. International Journal of Machine Tools & Manufacture. 49(10), 797-803
KONG, M.C. AND AXINTE, D.A., 2009. Response of Titanium Aluminide Alloy to Abrasive Waterjet Cutting: Geometrical Accuracy and Surface Integrity Issues vs. Process Parameters Proceedings of the IMECHE Part B: Journal of Engineering Manufacture. 223(1), 19-42
AXINTE, D. and KONG, MC, 2009. Annals of CIRP. 58(1), 303-306
BOUD, F., BAYARD, O., CHATTI, S., AXINTE, D., NICOLESCU, M. and AGIRRE, J., 2009. A new approach in standardising a European curriculum in production engineering European Journal of Engineering Education,. 34(6), 487-496.
MARINESCU J. and AXINTE D., 2009. International Journal of Machine Tools and Manufacture. 49(1), 53-65
LI W, WITHERS P.J, AXINTE D, PREUSS M and ANDREWS P., 2009. Journal of Materials Processing Technology. 209(10), 4896-4902
SHUKOR, SA and AXINTE D.A., 2009. An approach of using primitive feature analysis in manufacturability analysis systems for micro-milling/drilling International Journal of Computer Integrated Manufacturing. 22(8), 727 鈥� 744
SHUKOR S. A. and AXINTE D. A., 2009. International Journal of Production Research. 47(5), 1369 鈥� 1390
KWONG J, AXINTE D. A, WITHERS P.J and HARDY M. C., 2009. International Journal of Machine Tools & Manufacture. 49(7-8), 645-658
P.W, BUTLER-SMITH, D.A, AXINTE, M and DAINE, 2009. International Journal of Machine Tools and Manufacture. 49(15), 1175-1184
KWONG J., AXINTE D.A. and WITHERS P.J., 2009. Journal of Materials Processing Technology. 209(8), 3968-3977
SRINIVASU, D.S., AXINTE, D., SHIPWAY, P. and FOLKES, J., 2009. International Journal of Machine Tools and Manufacture. 49(14), 1077-1088
AXINTE D.A. and CAO Y.Y., 2008. Journal of Materials Processing Technology. 1-3/204, 357-364
MARINESCU, I. and AXINTE, D., 2008. International Journal of Machine Tools and Manufacture. 48(10), 1148-1160
AXINTE, D. and DE CHIFFRE L., 2008. Annals of CIRP. 57(1), 129-132
SHI, D., AXINTE, D. and GINDY, N.N., 2007. International Journal of Advanced Manufacturing Technology. 34(1-2), 34-46
AXINTE, D.A. and ANDREWS, P., 2007. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 221(4), 591-603
AXINTE D.A., 2007. An inverse method of teaching specialised manufacturing subjects: decomposing a focal representative product to sustain analysis and interaction of details European Journal of Engineering Education. 33(1), 1-18 (In Press.)
AXINTE, D.A., 2007. International Journal of Machine Tools & Manufacture. 47(14), 2182-2188
AXINTE, D.A., ANDREWS, P., LI, W., GINDY, N., WITHERS, P.J. and CHILDS,T.H.C., 2006. CIRP Annals. 55(1), 117-120
AXINTE, D.A., 2006. International Journal of Machine Tools & Manufacture. 46(12-13), 1445-1448
LI, W, PREUSS, M, WITHERS, PJ, AXINTE, D and ANDREWS, P, 2006. Materials Science Forum. 525, 587-594 (In Press.)
AXINTE, D.A., NATARAJAN, D.R. and GINDY, N.N.Z., 2005. International Journal of Machine Tools & Manufacture. 45(14), 1605-1613
AXINTE, D., BOUD, F., PENNY, J., GINDY, N. and WILLIAMS, D.J., 2005. CIRP Annals. 54(1), 87-90
AXINTE, D.A., KRITMANOROT, M., AXINTE, M. and GINDY, N.N.Z., 2005. Journal of Materials Processing Technology. 166(3), 398-404
MO, S.P., AXINTE, D.A., HYDE, T.H. and GINDY, N.N., 2005. Journal of Materials Processing Technology. 160(3), 382-389
AXINTE, D.A., GINDY, N., FOX, K. and UNANUE, I., 2004. International Journal of Machine Tools & Manufacture. 44(10), 1091-1108
AXINTE, D. and GINDY, N., 2004. International Journal of Production Research. 42(13), 2679-2691
AXINTE, D.A. and GINDY, N., 2004. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 218(7), 807-811
AXINTE, D.A. and GINDY, N., 2003. Wear. 254(3-4), 370-382
AXINTE, D., AXINTE, M. and TANNOCK, J.D.T., 2003. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 217(10), 1341-1353
AXINTE, D.A. and GINDY, N., 2002. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture. 216(10), 1407-1411
AXINTE, D.A. and DEWES, R.C., 2002. Journal of Materials Processing Technology. 127(3), 325-335
AXINTE, D.A., BELLUCO, W. and DE CHIFFRE, L., 2001. International Journal of Machine Tools & Manufacture. 41(5), 719-730
AXINTE, D.A., BELLUCO, W. and DE CHIFFRE, L., 2001. International Journal of Machine Tools & Manufacture. 41(7), 1003-1014
AXINTE, D. A. and DEWES, R. C., 2001. Tool wear and workpiece surface integrity when high speed ball nose end milling hardened AISI H13 Metal Cutting and High Speed Machining. 3RD, 171-180
AXINTE, D, MUNTEANU, V and EPUREANU, A., Structural change of the roll body superficial layer as a result of grinding process Tecnica Italiana. 2, 117-121
AXINTE, D, MUNTEANU, V and EPUREANU, A., Optimisation of the properties of surface layer formed during the roll grinding operation Revue de Metallurgie. 199, 915-923
ALI, A., SMARTT, C., IM, J., WILLIAMS, O., LESTER, E. and GREEDY, S., INTERNATIONAL JOURNAL OF MICROWAVE AND WIRELESS TECHNOLOGIES.