糖心原创

Department of
Mechanical, Materials and Manufacturing Engineering
 

Image of Ruth Goodridge

Ruth Goodridge

Professor of Additive Manufacturing (3D Printing), Faculty of Engineering

Contact

Biography

Ruth Goodridge graduated from the University of Birmingham in 1999 with a BMedSc(Hons) degree in Biomaterials. After a year out to work at Biomaterials companies and research institutes in the UK, Australia and the US, she returned to the UK to pursue a PhD at the University of Leeds looking at the laser sintering of bioceramics. Upon completion of her PhD in 2004, she was awarded a JSPS Fellowship to investigate new materials for laser sintering at NAIST, Japan. She joined the Additive Manufacturing Research Group at Loughborough University in 2006, where she continued her research into new materials for Additive Manufacturing/3D-Printing, predominantly focusing on laser sintering of polymers and the use of AM for biomaterials/bioengineering. In April 2012, she moved to the 糖心原创 as part of the EPSRC Centre for Innovative Manufacturing in Additive Manufacturing. She is currently on secondment to the NHS (Nottingham University Hospitals NHS Trust), funded by an EPSRC discipine hop award, exploring clinical need for Additive Manufacturing (inc.3D-Printing) and looking at ways to bridge the gap between current technical capabilities and use in clinical practice.

Other current projects include:

* Understanding processing of new materials by laser sintering, in particular polymer nanocomposites, thermoplastic elastomers, biomaterials, polyethylene.

* Additive Manufacturing of continuous flow reactors.

* Additive Manufacturing of Glass (in collaboration with Glass Technology Services, Sheffield)

* Surface modification of AM parts for medical applications.

* Production of medical implants and assistive devices (including prosthetics) using AM.

Previous grants

* Wearable Soft Robotics for Independent Living (EPSRC Grant - EP/M026388/1)

* ADAM: Anthropomorphic Design for Advanced Manufacture (EPSRC Grant - EP/N010280/1)

Ruth Goodridge is part of the Research Group.

Recent Publications

  • GOODRIDGE, R. D., HERREROS-LUCAS, C. and DEL CARMEN GIMENEZ-LOPEZ, M., 2023. Additive Manufacturing. 69,
  • MALAS, A., SALEH, E., GIM脡NEZ-L脫PEZ, M. D. C., RANCE, G. A., HELPS, T., TAGHAVI, M., ROSSITER, J. M., TUCK, C. J., ASHCROFT, I. A. and GOODRIDGE, R. D., 2022. Advanced Materials Technologies.
  • LAKHDAR, Y., TUCK, C., BINNER, J., TERRY, A. and GOODRIDGE, R., 2021. Progress in Materials Science. 116,
  • DATSIOU, K. C., SPIRRETT, F., ASHCROFT, I., MAGALLANES, M., CHRISTIE, S. and GOODRIDGE, R., 2021. Additive Manufacturing. 39,

Current PhD Students

Mr Yazid Lakhdar (Year 3) - Processing of Advanced Ceramics by Additive Manufacturing

Ms Yee Chirattikan Srisook (Year 3) - Additive Manufacturing of Cardiovascular Devices

Ms Binsha Ollekkatt Sivadas (Year 3) - 3D-Printing with 1D Functional Nanomaterials

Mr Samuel Connor (Year 2) - Laser Powder Bed Fusion of Polymer Nanocomposites

Past PhD Students

Dr Marina-Eirini Mitrousi (Awarded 2022) - Investigation of Laser Sintering of Pharmaceutical Excipients for Oral Solid Dosage Forms

Dr Fiona Spirrett (Awarded 2021) - Investigations into Glass Additive Manufacturing by Selective Laser Melting and Directed Energy Deposition

Dr Chung Han (Awarded 2021) - Investigation of Upper Limb Prosthesis Functionality using Quantitative Design Tools

Dr Katie Blake (Awarded 2021) - Additive Manufacturing of Cardiovascular Devices

Dr Nicholas Southon (Awarded 2020) - In-process monitoring of powder bed fusion with fringe projection

Dr Obinna Okafor (Awarded 2019) - Mesoscale Additively Manufactured Flow reactors for Synthetic, Crystallisation and Biocatalytic applications

Dr Dominic Hui (Awarded 2018) - Cytocompatibility of Nanostructured Degradable Materials for Additive Manufacturing

Dr Stefan Ziegelmeier (Awarded 2015) - Laser Sintering of Thermoplastic Elastomers

Dr Andrew Capel - (Awarded 2015) - Production of Flow Chemistry Reactors by Additive Manufacturing

Dr Sam Kilsby (Awarded 2015) - Design of biodegradable polymers for Jetting.

Dr Jayasheelan Vaithilingham (Awarded 2015) - Surface Modification of Metal Additive Manufacturing Parts for Medical Applications

Dr Jiaming Bai - (Awarded 2013) - Laser Sintering of Polymer Nanocomposites

  • GOODRIDGE, R. D., HERREROS-LUCAS, C. and DEL CARMEN GIMENEZ-LOPEZ, M., 2023. Additive Manufacturing. 69,
  • MALAS, A., SALEH, E., GIM脡NEZ-L脫PEZ, M. D. C., RANCE, G. A., HELPS, T., TAGHAVI, M., ROSSITER, J. M., TUCK, C. J., ASHCROFT, I. A. and GOODRIDGE, R. D., 2022. Advanced Materials Technologies.
  • LAKHDAR, Y., TUCK, C., BINNER, J., TERRY, A. and GOODRIDGE, R., 2021. Progress in Materials Science. 116,
  • DATSIOU, K. C., SPIRRETT, F., ASHCROFT, I., MAGALLANES, M., CHRISTIE, S. and GOODRIDGE, R., 2021. Additive Manufacturing. 39,
  • LAKHDAR, Y., TUCK, C., TERRY, A., SPADACCINI, C. and GOODRIDGE, R., 2021. Journal of the European Ceramic Society.
  • SIVADAS, B. O., ASHCROFT, I., KHLOBYSTOV, A. N. and GOODRIDGE, R. D., 2021. Advanced Industrial and Engineering Polymer Research. 4(4), 277-300
  • ALVAREZ, E., ROMERO-FERNANDEZ, M., IGLESIAS, D., MARTINEZ-CUENCA, R., OKAFOR, O., DELORME, A., LOZANO, P., GOODRIDGE, R., PARADISI, F., WALSH, D. A. and SANS, V., 2021. ACS Sustainable Chemistry and Engineering.
  • OKAFOR, O., GOODRIDGE, R. and SANS, V., 2020.
  • DATSIOU, K. C., SALEH, E., SPIRRETT, F., GOODRIDGE, R., ASHCROFT, I. and EUSTICE, D., 2019. Journal of the American Ceramic Society.
  • OKAFOR, O., ROBERTSON, K., GOODRIDGE, R. and SANS, V., 2019. Reaction Chemistry and Engineering. 4(9), 1682-1688
  • HUI, D., GOODRIDGE, R. D., SCOTCHFORD, C. A. and GRANT, D. M., 2018. Additive Manufacturing. 22, 560-570
  • SOUTHON, N., STAVROULAKIS, P., GOODRIDGE, R. and LEACH, R., 2018. Materials and Design. 157, 227-234
  • LAW A, SOUTHON N, STAVROULAKIS P, LEACH R K, GOODRIDGE R and KONG Z, 2018. Curvature-based segmentation of powder bed point clouds for in-process monitoring In: SFF Symp. 2018, Austin, USA, Aug..
  • CAPEL, A. J., WRIGHT, A., HARDING, M. J., WEAVER, G. W., LI, Y. Q., HARRIS, R. A., EDMONDSON, S., GOODRIDGE, R. D. and CHRISTIE, S. D. R., 2017. 3D printed fluidics with embedded analytic functionality for automated reaction optimisation: Beilstein Journal of Organic Chemistry Beilstein Journal of Organic Chemistry. 13, 111-119
  • OKAFOR, O., GOODRIDGE, R. and SANS, V., 2017. New trends in reactor engineering with additive manufacturing: Chimica Oggi-Chemistry Today Chimica Oggi-Chemistry Today. 35(4), 4-6
  • PERIS, EDGAR, OKAFOR, OBINNA, KULCINSKAJA, EVELINA, GOODRIDGE, RUTH, LUIS, SANTIAGO V., GARCIA-VERDUGO, EDUARDO, O'REILLY, ELAINE and SANS, VICTOR, 2017. GREEN CHEMISTRY. 19(22), 5345-5349
  • VAITHILINGAM, J., GOODRIDGE, R. D., HAGUE, R. J. M., CHRISTIE, S. D. R. and EDMONDSON, S., 2016. Journal of Materials Processing Technology. 232, 1-8
  • VAITHILINGAM, J., PRINA, E., GOODRIDGE, R. D., HAGUE, R. J. M., EDMONDSON, S., ROSE, F. R. A. J. and CHRISTIE, S. D. R., 2016. Materials Science and Engineering C. 67, 294-303
  • GUAN, G., LU, Z. H., HIRSCH, M., GOODRIDGE, R., CHILDS, D. T. D., MATCHER, S. J., CLARE, A. T. and GROOM, K. M., 2016.
  • GUAN, G. Y., LU, Z. H., HIRSCH, M., GOODRIDGE, R., CHILDS, D. T. D., MATCHER, S. J., CLARE, A. T. and GROOM, K. M., 2016. Towards in-situ process monitoring during additive manufacturing using optical coherence tomography. In: GU, B., HELVAJIAN, H. and PIQUE, A., eds., Laser 3d Manufacturing Iii 9738. Spie-Int Soc Optical Engineering.
  • GUAN, G. Y., LU, Z. H., HIRSCH, M., GOODRIDGE, R., CHILDS, D. T. D., MATCHER, S. J., CLARE, A. T. and GROOM, K. M., 2016. Towards in-situ process monitoring during additive manufacturing using optical coherence tomography. In: GU, B., HELVAJIAN, H. and PIQUE, A., eds., Laser 3d Manufacturing Iii 9738. Spie-Int Soc Optical Engineering.
  • GOODRIDGE, R. and ZIEGELMEIER, S., 2016. . In: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications Elsevier Inc.. 181-204
  • VAITHILINGAM, J., KILSBY, S., GOODRIDGE, R. D., CHRISTIE, S. D. R., EDMONDSON, S. and HAGUE, R. J. M., 2015. Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound: Materials Science & Engineering C-Materials for Biological Applications Materials Science & Engineering C-Materials for Biological Applications. 46, 52-61
  • VAITHILINGAM, J., GOODRIDGE, R. D., CHRISTIE, S. D. R., EDMONDSON, S. and HAGUE, R. J. M., 2015.
  • BABU, S. S. and GOODRIDGE, R., 2015. Materials Science and Technology (United Kingdom). 31(8), 881-883
  • GUAN, G., HIRSCH, M., LU, Z. H., CHILDS, D. T. D., MATCHER, S. J., GOODRIDGE, R., GROOM, K. M. and CLARE, A. T., 2015. 88, 837-846
  • BAI, J., GOODRIDGE, R. D., HAGUE, R. J. and OKAMOTO, M., 2015. Polymer Composites.
  • BAI, J., GOODRIDGE, R. D., YUAN, S., ZHOU, K., CHUA, C. K. and WEI, J., 2015. Molecules. 20(10), 19041-19050
  • COOK, J. E. T., GOODRIDGE, R. D. and SIVIOUR, C. R., 2015.
  • JAYASHEELAN VAITHILINGAM, SAMUEL KILSBY, RUTH D. GOODRIDGE, STEVEN D.R. CHRISTIE, STEVE EDMONDSON and RICHARD J.M. HAGUE, 2014. Applied Surface Science. 314, 642-654
  • BAI, JM ; GOODRIDGE, RD ; HAGUE, RJM ; SONG, M ; OKAMOTO, M, 2014. POLYMER TESTING. 36, 95-100
  • ZIEGELMEIER S., CHRISTOU P., W脰LLECKE F., TUCK CJ., GOODRIDGE RD. and HAGUE RJM, 2014. An experimental study into the effects of bulk and flow behaviour of Laser Sintering polymer powders on resulting part properties Journal of Materials Processing Technology.
  • ZIEGELMEIER, S., WOLLECKE, F., TUCK, C. J., GOODRIDGE, R. D. and HAGUE, R. J. M., 2014. Aging behavior of thermoplastic elastomers in the laser sintering process: Journal of Materials Research Journal of Materials Research. 29(17), 1841-1851
  • ZIEGELMEIER, S., CHRISTOU, P., W脰LLECKE, F., TUCK, C., GOODRIDGE, R., HAGUE, R., KRAMPE, E. and WINTERMANTEL, E., 2014. Journal of Materials Processing Technology. 215(1), 239-250
  • VAITHILINGAM, J., KILSBY, S., GOODRIDGE, R. D., CHRISTIE, S. D. R., EDMONDSON, S. and HAGUE, R. J. M., 2014. Materials Science and Engineering C. 46, 52-61
  • VAITHILINGAM, J., KILSBY, S., GOODRIDGE, R. D., CHRISTIE, S. D. R., EDMONDSON, S. and HAGUE, R. J. M., 2014. Materials Science and Engineering C. 46, 52-61
  • BAI, J., GOODRIDGE, R.D., HAGUE, R.J.M. and SONG, M., 2013. Polymer Engineering & Science. 53(9), 1937-1946
  • CAPEL A J, EDMONDSON S, CHRISTIE SD, GOODRIDGE RD and BIBB RJ, 2013. Lab on a Chip. 13, 4583-4590
  • SAKAI R., JOHN B., OKAMOTO M., SEPPALA J.V., VAITHILINGAM J., HUSSEIN H., GOODRIDGE R., 2013. Macromolecular Materials and Engineering. 298(1), 45-52
  • ZIEGELMEIER, S, W脰LLECKE, F, TUCK, C, GOODRIDGE, R, HAGUE, R, 2013. Characterizing the bulk & flow behaviour of LS polymer powders In: 24th International SFF Symposium - An Additive Manufacturing Conference, SFF 2013. 354-367
  • GOODRIDGE RD, EDMONDSON S and CHRISTIE S, 2012. Functionalisation of customised load-bearing implants produced by Additive Manufacturing In: Proceedings of the World Biomaterials Congress, Chengdu, China.
  • VAITHILINGHAM J, GOODRIDGE RD, HAGUE RJM and CHRISTIE S, 2012. Additive Manufacturing and surface modification of tracheobronchial stents using self-assembled monolayers In: Proceedings of the 9th World Biomaterials Congress, Chengdu, China.
  • VAITHILINGAM J, GOODRIDGE RD, HAGUE RJM, CHRISTIE S and EDMONDSON S, 2012. Surface Modification of Selective Laser Melted Ti6Al4V Structures using Self-Assembled Monolayers In: 11th Annual Conference of the UK Society for Biomaterials, Nottingham, UK. 37
  • GOODRIDGE RD, 2012. Polymer Laser Sintering: Improving material choice and performance In: Proceedings of the 3D Printing and Additive Manufacturing Conference, Nottingham, UK.
  • GOODRIDGE, R.D., TUCK, C.J. and HAGUE, R.J.M., 2012. Progress in Materials Science. 57(2), 229-267
  • JAYASHEELAN VAITHILINGAM, RUTH D GOODRIDGE, STEVEN D CHRISTIE, STEVE EDMONDSON and RICHARD JM HAGUE, 2012. In: Twenty Third International Conference on Solid Free Form Fabrication, Texas, USA. 316 - 325
  • BAI J, GOODRIDGE RD, HAGUE RJM and SONG M, 2012. Processing and Characterisation of a Polyamide 12-Carbon Nanotube Composite by Laser Sintering In: 23rd Annual International Solid Freeform Fabrication Symposium.
  • BAI J, GOODRIDGE RD, HAGUE RJM and SONG M, 2011. Processing and Characterisation of a Polyamide 12-Carbon Nanotube Composite by Laser Sintering In: Proceedings of the 19th Annual International Conference on Composites and Nano Engineering, Shanghai, China. 79
  • GOODRIDGE RD, 2011. Possibilities and Research Opportunities for Additive Manufacturing of Sports Equipment In: JSPS UK-Japan Sports Engineering Symposium, Loughborough University, Loughborough.
  • GOODRIDGE, R.D., SHOFNER, M.L., HAGUE, R.J.M., MCCLELLAND, M., SCHLEA, M.R., JOHNSON, R.B. and TUCK, C.J., 2011. Polymer Testing. 30(1), 94-100
  • GOODRIDGE, R.D., HAGUE, R.J.M. and TUCK, C.J., 2010. Polymer Testing. 29(4), 483-493
  • GOODRIDGE, R.D., HAGUE, R.J.M. and TUCK, C.J., 2010. Journal of Materials Processing Technology. 210(1), 72-80
  • GOODRIDGE RD and HAGUE RJM, 2010. In search of polymer materials for laser sintering In: Proceedings of the 21st Solid Freeform Fabrication Symposium, Texas, USA.
  • BAI J, GOODRIDGE RD, HAGUE RJM and SONG M, 2010. Processing and Characterisation of a Polyamide 12-Carbon Nanotube Composite by Laser Sintering World Journal of Engineering. 7(3), 79-80
  • GOODRIDGE RD, HAGUE RJM and TUCK CJ, 2009. Investigation of New Materials for Selective Laser Sintering In: Materials Issues in Additive Powder-Based Manufacturing Processes Symposium, TMS2009, California, USA.
  • XIAO, K., DALGARNO, K.W., WOOD, D.J., GOODRIDGE, R.D. and OHTSUKI, C., 2008. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 222(7), 1107-1114
  • GOODRIDGE RD, WOOD DJ, OHTSUKI C and DALGARNO KW, 2007. Acta Biomaterialia. 3(2), 221-31
  • XIAO K, DYSON JA, DALGARNO KW, GENEVER P, WOOD DJ, GOODRIDGE RD and OHTSUKI C, 2007. Manufacture and characterisation of bioceramic tissue engineering scaffolds produced by laser sintering. In: Proceedings of the International Manufacturing Science and Engineering Conference, Atlanta, USA.
  • GOODRIDGE RD and HAGUE RJM, 2007. Investigation of Rapid Manufacturing Materials for Protective Sportswear. In: Proceedings of the 18th Solid Freeform Fabrication Symposium.
  • GOODRIDGE RD and HAGUE RJM, 2007. Investigation of Rapid Manufacturing Materials for Protective Sportswear In: 31st RP Symposium of Japan, Tokyo, Japan.
  • GOODRIDGE RD, DALGARNO KW and WOOD DJ, 2006. Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications. Proceedings of the institution of mechanical engineers. Part h, journal of engineering in medicine. 220(1), 57-68
  • GOODRIDGE RD, OHTSUKI C, KAMITAKAHARA M, WOOD DJ and DALGARNO KW, 2006. Key Engineering Materials. 289-292
  • DALGARNO KW, PALLARI JH, WOODBURN J, XIAO K, WOOD DJ, GOODRIDGE RD and OHTSUKI C, 2006. Virtual and Physical Prototyping. 1(3), 137-145
  • SAVALANI MM, GOODRIDGE RD, HAO L and HARRIS RA, 2006. Selective Laser Sintering of Bioactive Structures for Bone Replacement In: Proceedings of the 17th Solid Freeform Fabrication, Texas, USA.
  • DALGARNO KW, WOOD DJ, GOODRIDGE RD, XIAO K, OHTSUKI C, GENEVER P and DYSON JA, 2005. Mechanical properties and biological responses of bioactive glass ceramics processed using indirect SLS In: Proceedings of the 16th Annual Solid Freeform Fabrication Symposium, Texas, USA. 132-140
  • GOODRIDGE RD, KAMITAKAHARA M, OHTSUKI C, DALGARNO KW and WOOD DJ, 2005. Development of bioactive glass-ceramics for use with the selective laser sintering (SLS) process In: Archives of Bioceramics Research Vol.5..
  • GOODRIDGE RD, KAMITAKAHARA M, OHTSUKI C, DALGARNO KW and WOOD DJ, 2005. Biological properties of an apatite-mullite glass-ceramic produced via selective laser sintering (SLS) In: 19th European Society for Biomaterials Conference.
  • DALGARNO KW, PALLARI JH, WOODBURN J, XIAO K, WOOD DJ, GOODRIDGE RD and OHTSUKI C, 2005. Mass customisation of medical devices and implants: State of the art and future directions In: 3rd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC2005), Hong Kong..
  • GOODRIDGE RD, LORRISON JC, DALGARNO KW and WOOD DJ, 2004. A comparison of direct and indirect selective laser sintering of porous apatite-mullite glass ceramics Glass Technology: European Journal of Glass Science and Technology, Part A. 45(2), 94-96
  • DALGARNO KW and GOODRIDGE RD, 2004. Rapid Prototyping Journal. 10(4), 261-264
  • GOODRIDGE RD, DALGARNO KW and WOOD DJ, 2004. Layer manufacturing of porous bioactive glass-ceramics using selective laser sintering In: International Conference on Manufacturing Automation. 739-746
  • GOODRIDGE RD, LORRISON JC, DALGARNO KW and WOOD DJ, 2003. A comparison of direct and indirect selective laser sintering of porous apatite-mullite glass ceramics In: Crystallisation 2003: Seventh International Symposium on Crystallisation in Glasses and Liquids.
  • GOODRIDGE RD, WOOD DJ and DALGARNO KW, 2003. Producing porous glass-ceramic implants by SLS for bone Replacement applications In: Proceedings of the World Congress on Medical Physics and Biomedical Engineering.
  • LORRISON JC, GOODRIDGE RD, DALGARNO KW and WOOD DJ, 2002. Selective laser sintering of bioactive glass-ceramics In: Proceedings of the Solid Freeform Fabrication Symposium, Texas, USA.
  • GOODRIDGE RD, WOOD DJ and DALGARNO KW, 2002. Selective Laser Sintering of Bioactive Glass-ceramics In: Proceedings of the 17th European Society for Biomaterials Conference.
  • NICHOLSON JW, MCKENZIE MA, GOODRIDGE R and WILSON AD, 2001. Journal of Materials Science. Materials in Medicine. 12(7), 647-52
  • SPIRRETT, F., DATSIOU, K. C., MAGALLANES, M., ASHCROFT, I. and GOODRIDGE, R., Powder-fed directed energy deposition of soda lime silica glass on glass substrates: Journal of the American Ceramic Society Journal of the American Ceramic Society.

Department of Mechanical, Manufacturing and Materials Engineering

The 糖心原创
University Park
Nottingham, NG7 2RD


telephone: +44 (0) 115 95 14081